BMW DTC P0716 – Input/Turbine Shaft Speed Sensor ‘A’ Circuit Range/Performance
DTC P0716 meaning on BMW
The Diagnostic Trouble Code (DTC) P0716 for BMW refers to the Input/Turbine Shaft Speed Sensor ‘A’ Circuit Range/Performance. This code indicates that the powertrain control module (PCM) has detected a discrepancy in the signal from the input/turbine shaft speed sensor ‘A’, which is responsible for monitoring the rotational speed of the transmission input shaft.
BMW DTC P0716 symptoms
Symptoms of DTC P0716 on a BMW may include:
- Check Engine Light (CEL) illuminated on the dashboard
- Transmission shifting issues or erratic shifting
- Harsh or delayed shifting
- Decreased fuel efficiency
BMW DTC P0716 causes
Common causes of DTC P0716 on a BMW include:
- Failed input/turbine shaft speed sensor ‘A’
- Wiring or connector issues in the sensor circuit
- PCM software or hardware problems
- Mechanical issues within the transmission
BMW DTC P0716 seriousness
While DTC P0716 may not always result in immediate drivability issues, it is important to address this code promptly to prevent potential transmission damage or further complications. Ignoring this code can lead to more severe transmission problems over time.
How to diagnose DTC P0716 on BMW
To diagnose DTC P0716 on a BMW, you can follow these steps:
- Use a diagnostic scanner to retrieve the fault codes stored in the PCM.
- Inspect the wiring and connectors related to the input/turbine shaft speed sensor ‘A’ for any damage or corrosion.
- Test the sensor’s resistance and signal output using a multimeter.
- Check for any mechanical issues within the transmission that may be affecting the sensor’s readings.
How to fix DTC P0716 on BMW
To fix DTC P0716 on a BMW, you can try the following solutions:
- Replace the input/turbine shaft speed sensor ‘A’ if it is found to be faulty.
- Repair or replace any damaged wiring or connectors in the sensor circuit.
- Update the PCM software if necessary.
- Address any mechanical issues within the transmission that may be causing the problem.
How to erase DTC P0716 on BMW
To erase DTC P0716 on a BMW, you can clear the fault codes using a diagnostic scanner. After addressing the underlying issue that triggered the code, you can reset the PCM by clearing the codes. This will turn off the Check Engine Light and reset the system for a fresh start.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.