BMW DTC P075C – Shift Solenoid ‘G’ Stuck On
DTC P075C meaning on BMW
The Diagnostic Trouble Code (DTC) P075C for BMW indicates that the Shift Solenoid ‘G’ is stuck on. This means that the transmission control module has detected a continuous signal from the Shift Solenoid ‘G’, which is responsible for controlling the flow of transmission fluid to engage or disengage specific gears.
BMW DTC P075C symptoms
Symptoms of the DTC P075C on a BMW may include harsh shifting, delayed shifting, transmission slipping, inability to shift gears, and in some cases, the transmission may go into a fail-safe mode to prevent further damage.
BMW DTC P075C causes
The common causes of the DTC P075C on a BMW include a faulty Shift Solenoid ‘G’, low transmission fluid level, dirty or contaminated transmission fluid, electrical issues such as a short circuit or open circuit in the solenoid circuit, or a malfunctioning transmission control module.
BMW DTC P075C seriousness
Ignoring the DTC P075C on a BMW can lead to further transmission damage and potentially leave the vehicle inoperable. It is important to address this issue promptly to prevent costly repairs and ensure the safety and drivability of the vehicle.
How to diagnose DTC P075C on BMW
To diagnose the DTC P075C on a BMW, a mechanic would typically start by using a diagnostic scanner to retrieve the fault codes from the transmission control module. They would then perform a visual inspection of the transmission fluid level and condition, followed by testing the Shift Solenoid ‘G’ for proper operation using a multimeter.
How to fix DTC P075C on BMW
Fixing the DTC P075C on a BMW may involve replacing the faulty Shift Solenoid ‘G’, performing a transmission fluid flush and filter replacement, repairing any electrical issues in the solenoid circuit, or reprogramming the transmission control module if necessary. It is recommended to follow the manufacturer’s repair procedures and use quality replacement parts.
How to erase DTC P075C on BMW
Once the underlying issue causing the DTC P075C on a BMW has been resolved, the fault codes can be cleared using a diagnostic scanner. This will erase the DTC from the memory of the transmission control module and reset the transmission adaptations. It is important to verify that the issue has been successfully addressed before clearing the fault codes.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.