BMW DTC P07E8 – Transmission Range Control ‘A’ Circuit/Open
DTC P07E8 meaning on BMW
The DTC P07E8 code on a BMW indicates an issue with the Transmission Range Control ‘A’ Circuit being open or having a malfunction. This fault typically points to a problem with the transmission range sensor or its circuitry.
BMW DTC P07E8 symptoms
Symptoms of the DTC P07E8 code on a BMW may include:
- Difficulty shifting gears
- Transmission stuck in one gear
- Harsh shifting
- Transmission slipping
- Check Engine Light illuminated
BMW DTC P07E8 causes
Common causes of the DTC P07E8 code on a BMW include:
- Defective transmission range sensor
- Wiring or connector issues in the transmission range control circuit
- Faulty transmission control module (TCM)
- Corrosion or poor connections in the sensor circuit
BMW DTC P07E8 seriousness
The DTC P07E8 code should not be ignored as it can lead to drivability issues and potential transmission damage if left unresolved. It is recommended to address this fault promptly to prevent further complications.
How to diagnose DTC P07E8 on BMW
To diagnose the DTC P07E8 code on a BMW, you can follow these steps:
- Use a diagnostic scanner to retrieve the fault codes stored in the vehicle’s computer.
- Inspect the transmission range sensor and its wiring for any visible damage or corrosion.
- Check the connector for the transmission range sensor for proper connection and signs of wear.
- Perform a continuity test on the sensor circuit to identify any open circuits.
- Test the transmission range sensor’s output signal using a multimeter.
How to fix DTC P07E8 on BMW
To fix the DTC P07E8 code on a BMW, you can try the following solutions:
- Replace the transmission range sensor if it is found to be faulty.
- Repair any damaged wiring or connectors in the transmission range control circuit.
- Clean any corrosion from the sensor circuit and ensure proper connections.
- If necessary, replace the transmission control module (TCM) if it is determined to be the cause of the issue.
How to erase DTC P07E8 on BMW
To erase the DTC P07E8 code on a BMW, you can use a diagnostic scanner to clear the fault codes stored in the vehicle’s computer. Once the issue has been addressed and fixed, you can reset the codes to turn off the Check Engine Light and ensure the problem has been resolved.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.