BMW DTC P0819 – Up and Down Shift Switch to Transmission Range Correlation
DTC P0819 meaning on BMW
DTC P0819 on a BMW indicates a problem with the correlation between the up and down shift switch and the transmission range sensor. This fault code is triggered when the Engine Control Module (ECM) detects that the signal from the up and down shift switch does not match the signal from the transmission range sensor.
BMW DTC P0819 symptoms
Symptoms of DTC P0819 on a BMW may include erratic shifting behavior, difficulty shifting gears, transmission slipping, and the transmission going into ¨limp mode¨ where it operates in a single gear only.
BMW DTC P0819 causes
The most common causes of DTC P0819 on a BMW include a faulty up and down shift switch, a malfunctioning transmission range sensor, wiring issues between the switch and sensor, or a problem with the ECM itself.
BMW DTC P0819 seriousness
DTC P0819 should not be ignored as it can lead to drivability issues and potential damage to the transmission if left unresolved. It is recommended to address this fault code promptly to prevent further complications.
How to diagnose DTC P0819 on BMW
To diagnose DTC P0819 on a BMW, a mechanic would typically start by using a diagnostic scanner to retrieve the fault code and perform a visual inspection of the up and down shift switch, transmission range sensor, and related wiring. They may also conduct tests to check the functionality of these components and verify the correlation between the switch and sensor signals.
How to fix DTC P0819 on BMW
Fixing DTC P0819 on a BMW usually involves replacing the faulty up and down shift switch or transmission range sensor, repairing any damaged wiring, or reprogramming the ECM if necessary. It is important to use genuine BMW parts and follow the manufacturer’s repair procedures to ensure a proper fix.
How to erase DTC P0819 on BMW
Once the underlying issue causing DTC P0819 on a BMW has been resolved, the fault code can be cleared using a diagnostic scanner. This will reset the ECM’s memory and turn off the check engine light. It is important to verify that the fault code does not return after clearing it to ensure the problem has been successfully addressed.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.