P0878 – BMW DTC

BMW DTC P0878 – Transmission Fluid Pressure Sensor/Switch ‘D’ Circuit High

DTC P0878 meaning on BMW

The Diagnostic Trouble Code (DTC) P0878 for BMW indicates a malfunction in the Transmission Fluid Pressure Sensor/Switch ‘D’ Circuit, where the signal voltage is detected to be higher than the expected range.

BMW DTC P0878 symptoms

Symptoms of DTC P0878 on a BMW may include:

  • Harsh shifting
  • Transmission slipping
  • Transmission overheating
  • Transmission warning light illuminated on the dashboard

BMW DTC P0878 causes

Common causes of DTC P0878 on a BMW include:

  • Defective transmission fluid pressure sensor/switch
  • Wiring or connector issues in the transmission fluid pressure sensor circuit
  • Low transmission fluid level or dirty transmission fluid
  • Internal transmission problems

BMW DTC P0878 seriousness

Ignoring DTC P0878 on a BMW can lead to further transmission damage and potential safety hazards. It is important to address this issue promptly to prevent more severe transmission problems.

How to diagnose DTC P0878 on BMW

To diagnose DTC P0878 on a BMW, a mechanic may perform the following steps:

  1. Use a diagnostic scanner to retrieve the fault codes
  2. Inspect the transmission fluid pressure sensor/switch and its wiring for any visible damage
  3. Check the transmission fluid level and condition
  4. Perform a thorough transmission system inspection for any other related issues

How to fix DTC P0878 on BMW

To fix DTC P0878 on a BMW, the following steps may be taken:

  1. Replace the faulty transmission fluid pressure sensor/switch
  2. Repair or replace any damaged wiring or connectors in the sensor circuit
  3. Ensure the transmission fluid is at the correct level and in good condition
  4. If internal transmission problems are found, further diagnostics and repairs may be necessary

How to erase DTC P0878 on BMW

After fixing the underlying issue causing DTC P0878 on a BMW, the fault codes can be erased using a diagnostic scanner. This will clear the code from the vehicle’s memory and turn off the transmission warning light.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.