P0915 – BMW DTC

BMW DTC P0915 – Gear Shift Position Circuit Range/Performance

DTC P0915 meaning on BMW

DTC P0915 on a BMW refers to the Gear Shift Position Circuit Range/Performance. This diagnostic trouble code indicates that there is an issue with the gear shift position sensor or its circuitry. The sensor is responsible for detecting the position of the gear shift lever and sending this information to the vehicle’s engine control module (ECM).

BMW DTC P0915 symptoms

Symptoms of DTC P0915 on a BMW may include:

  • Difficulty shifting gears
  • Incorrect gear display on the instrument cluster
  • Check Engine Light (CEL) illuminated
  • Limp mode activation

BMW DTC P0915 causes

The common causes of DTC P0915 on a BMW include:

  • Defective gear shift position sensor
  • Wiring or connector issues in the gear shift position circuit
  • ECM software or hardware problems

BMW DTC P0915 seriousness

DTC P0915 should not be ignored as it can lead to drivability issues and potential safety concerns. If left unresolved, it may result in transmission problems and further damage to the vehicle.

How to diagnose DTC P0915 on BMW

To diagnose DTC P0915 on a BMW, a mechanic would typically perform the following steps:

  1. Use a diagnostic scanner to retrieve the fault codes stored in the ECM
  2. Inspect the gear shift position sensor and its wiring for any visible damage
  3. Test the sensor’s resistance and voltage output
  4. Check for any loose or corroded connectors
  5. Perform a road test to verify the symptoms

How to fix DTC P0915 on BMW

Depending on the root cause, fixing DTC P0915 on a BMW may involve:

  • Replacing the gear shift position sensor
  • Repairing or replacing damaged wiring or connectors
  • Updating the ECM software

How to erase DTC P0915 on BMW

After the issue causing DTC P0915 has been resolved, the fault codes can be cleared using a diagnostic scanner. This will reset the Check Engine Light and allow the vehicle to relearn the corrected parameters. It is important to ensure that the repair has been successful before clearing the fault codes.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.