BMW DTC P0982 – Shift Solenoid ‘D’ Control Circuit Low
DTC P0982 meaning on BMW
The Diagnostic Trouble Code (DTC) P0982 for BMW refers to an issue with the Shift Solenoid ‘D’ Control Circuit being detected as low. This code indicates that the powertrain control module (PCM) has detected a lower than expected voltage signal from the Shift Solenoid ‘D’ control circuit.
BMW DTC P0982 symptoms
Symptoms of DTC P0982 on a BMW may include:
- Harsh or delayed shifting
- Transmission slipping
- Transmission not shifting gears properly
- Check Engine Light illuminated on the dashboard
BMW DTC P0982 causes
Common causes of DTC P0982 on a BMW include:
- Faulty Shift Solenoid ‘D’
- Wiring issues in the Shift Solenoid ‘D’ control circuit
- Corrosion or poor connections in the circuit
- Internal transmission issues
BMW DTC P0982 seriousness
DTC P0982 should be addressed promptly as it can lead to drivability issues and potential damage to the transmission if left unresolved. Ignoring this code may result in further transmission problems and increased repair costs.
How to diagnose DTC P0982 on BMW
To diagnose DTC P0982 on a BMW, you can follow these steps:
- Use a diagnostic scanner to retrieve the fault codes stored in the PCM.
- Inspect the Shift Solenoid ‘D’ and its wiring for any visible damage or corrosion.
- Perform a continuity test on the Shift Solenoid ‘D’ control circuit to check for any open or short circuits.
- Check the transmission fluid level and condition.
How to fix DTC P0982 on BMW
To fix DTC P0982 on a BMW, you can try the following:
- Replace the faulty Shift Solenoid ‘D’ if necessary.
- Repair any damaged wiring or connectors in the Shift Solenoid ‘D’ control circuit.
- Clean any corrosion from the circuit connections.
- Perform a transmission fluid flush and refill if needed.
How to erase DTC P0982 on BMW
To erase DTC P0982 on a BMW, you can use a diagnostic scanner to clear the fault codes stored in the PCM. After addressing the underlying issue causing the code, clearing the code will reset the Check Engine Light and monitor the system for any recurring faults.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.