P0995 – BMW DTC

BMW DTC P0995 – Transmission Fluid Pressure Sensor/Switch ‘F’ Circuit High

DTC P0995 meaning on BMW

DTC P0995 on a BMW indicates a fault with the Transmission Fluid Pressure Sensor/Switch ‘F’ Circuit. This fault code is triggered when the powertrain control module (PCM) detects that the signal voltage from the transmission fluid pressure sensor/switch ‘F’ is higher than the specified range.

BMW DTC P0995 symptoms

Symptoms of DTC P0995 on a BMW may include:

• Check Engine Light illuminated
• Transmission shifting issues
• Harsh or delayed shifting
• Transmission slipping

BMW DTC P0995 causes

The common causes of DTC P0995 on a BMW include:

• Faulty transmission fluid pressure sensor/switch ‘F’
• Wiring or connector issues in the sensor circuit
• Low transmission fluid level or dirty fluid
• Internal transmission problems

BMW DTC P0995 seriousness

Ignoring DTC P0995 on a BMW can lead to potential transmission damage and drivability issues. It is important to address this fault code promptly to prevent further damage to the transmission system.

How to diagnose DTC P0995 on BMW

To diagnose DTC P0995 on a BMW, follow these steps:

1. Use a diagnostic scanner to retrieve the fault code and freeze frame data.
2. Inspect the wiring and connectors in the transmission fluid pressure sensor/switch ‘F’ circuit for any damage or corrosion.
3. Check the transmission fluid level and condition.
4. Test the transmission fluid pressure sensor/switch ‘F’ using a multimeter to ensure it is functioning correctly.
5. Perform a thorough visual inspection of the transmission system for any signs of leaks or damage.

How to fix DTC P0995 on BMW

To fix DTC P0995 on a BMW, consider the following steps:

1. Replace the faulty transmission fluid pressure sensor/switch ‘F’ if it is found to be defective.
2. Repair any damaged wiring or connectors in the sensor circuit.
3. Ensure the transmission fluid level is at the correct level and replace the fluid if necessary.
4. If internal transmission issues are suspected, consult a professional mechanic for further diagnosis and repair.

How to erase DTC P0995 on BMW

To erase DTC P0995 on a BMW, follow these steps:

1. Use a diagnostic scanner to clear the fault code from the PCM memory.
2. After clearing the code, test drive the vehicle to ensure the code does not return.
3. If the code returns, further diagnosis may be required to address the underlying issue.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.