P0A96 – BMW DTC

BMW DTC P0A96 – Hybrid/EV Battery Pack Cooling Fan 2 Control Circuit/Open

DTC P0A96 meaning on BMW

The Diagnostic Trouble Code (DTC) P0A96 for BMW indicates an issue with the Hybrid/EV Battery Pack Cooling Fan 2 Control Circuit being open. This means that there is a malfunction in the circuit that controls the cooling fan for the hybrid or electric vehicle battery pack.

BMW DTC P0A96 symptoms

Symptoms of the DTC P0A96 on a BMW may include:

• Check Engine Light illuminated
• Hybrid or electric vehicle system warning light on
• Reduced cooling performance for the battery pack

BMW DTC P0A96 causes

Common causes of the DTC P0A96 on a BMW include:

• Faulty Hybrid/EV Battery Pack Cooling Fan 2
• Open or short circuit in the control wiring
• Defective cooling fan control module

BMW DTC P0A96 seriousness

The DTC P0A96 should be addressed promptly as it can lead to inadequate cooling of the hybrid or electric vehicle battery pack. Continued operation with this fault can potentially cause damage to the battery pack and affect the vehicle’s performance.

How to diagnose DTC P0A96 on BMW

To diagnose the DTC P0A96 on a BMW, a mechanic would typically perform the following steps:

1. Use a diagnostic scanner to retrieve the fault codes
2. Inspect the Hybrid/EV Battery Pack Cooling Fan 2 and its wiring for any visible damage
3. Check the cooling fan control module for proper operation
4. Perform a circuit test to identify any open or short circuits

How to fix DTC P0A96 on BMW

To fix the DTC P0A96 on a BMW, the following steps may be taken:

1. Replace the faulty Hybrid/EV Battery Pack Cooling Fan 2
2. Repair any open or short circuits in the control wiring
3. Replace the cooling fan control module if necessary
4. Clear the fault codes and test the system for proper operation

How to erase DTC P0A96 on BMW

To erase the DTC P0A96 on a BMW, the fault codes can be cleared using a diagnostic scanner. Once the underlying issue has been addressed and fixed, clearing the fault codes will reset the system and turn off the warning lights on the dashboard.