P0BD9 – BMW DTC

BMW DTC P0BD9 – Drive Motor Inverter Temperature Sensor ‘D’ Circuit High

DTC P0BD9 meaning on BMW

The DTC P0BD9 code for BMW refers to the Drive Motor Inverter Temperature Sensor ‘D’ Circuit High. This diagnostic trouble code indicates that the temperature sensor circuit for the drive motor inverter is reading a high voltage signal, which may be out of the specified range.

BMW DTC P0BD9 symptoms

Symptoms associated with the BMW DTC P0BD9 code may include:

• Check Engine Light illuminated on the dashboard
• Reduced power or performance
• Increased fuel consumption
• Vehicle may go into a reduced power mode

BMW DTC P0BD9 causes

The potential causes of the BMW DTC P0BD9 code include:

• Faulty drive motor inverter temperature sensor
• Wiring or connector issues in the temperature sensor circuit
• Internal fault in the drive motor inverter

BMW DTC P0BD9 seriousness

The DTC P0BD9 code should not be ignored as it can lead to performance issues and potential damage to the drive motor inverter system. It is recommended to address this issue promptly to prevent further complications.

How to diagnose DTC P0BD9 on BMW

To diagnose the DTC P0BD9 on a BMW, you can follow these steps:

1. Use a diagnostic scanner to retrieve the fault codes stored in the vehicle’s computer
2. Inspect the drive motor inverter temperature sensor and its wiring for any visible damage or corrosion
3. Test the temperature sensor circuit for proper voltage and continuity
4. Check for any loose connections or poor grounds in the circuit

How to fix DTC P0BD9 on BMW

To fix the DTC P0BD9 on a BMW, you may need to:

1. Replace the drive motor inverter temperature sensor if it is found to be faulty
2. Repair or replace any damaged wiring or connectors in the temperature sensor circuit
3. If the drive motor inverter is determined to be faulty, it may need to be replaced or repaired

How to erase DTC P0BD9 on BMW

To erase the DTC P0BD9 code on a BMW, you can:

1. Use a diagnostic scanner to clear the fault codes stored in the vehicle’s computer
2. After making the necessary repairs, reset the system by disconnecting the battery for a few minutes
3. Reconnect the battery and start the vehicle to see if the code returns

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.