BMW DTC P0C17 – Drive Motor ‘A’ Position Sensor Not Learned
DTC P0C17 meaning on BMW
DTC P0C17 on a BMW indicates that the Drive Motor ‘A’ Position Sensor has not been learned by the vehicle’s control module. This means that the sensor’s position data has not been properly calibrated or stored in the system’s memory.
BMW DTC P0C17 symptoms
Symptoms of DTC P0C17 on a BMW may include erratic or rough engine performance, reduced power output, and potential drivability issues. The vehicle may also exhibit warning lights on the dashboard related to the hybrid or electric drive system.
BMW DTC P0C17 causes
The most common causes of DTC P0C17 on a BMW are a faulty drive motor position sensor, wiring issues, or a malfunction in the control module that prevents the sensor data from being learned or stored correctly.
BMW DTC P0C17 seriousness
While DTC P0C17 may not always result in immediate drivability issues, it is important to address this fault promptly to prevent potential damage to other components of the hybrid or electric drive system. Ignoring this fault could lead to more severe problems over time.
How to diagnose DTC P0C17 on BMW
To diagnose DTC P0C17 on a BMW, a diagnostic scan tool capable of reading hybrid or electric drive system codes is required. The technician will need to retrieve the fault code, inspect the drive motor position sensor and its wiring for any visible damage, and perform a sensor calibration procedure if necessary.
How to fix DTC P0C17 on BMW
Fixing DTC P0C17 on a BMW typically involves recalibrating the drive motor position sensor using a specialized diagnostic tool. If the sensor is found to be faulty, it will need to be replaced. Additionally, any wiring issues should be repaired, and the control module may need to be reprogrammed to learn the new sensor data.
How to erase DTC P0C17 on BMW
Once the underlying issue causing DTC P0C17 on a BMW has been resolved, the fault code can be cleared using a diagnostic scan tool. The technician can access the vehicle’s control module, navigate to the fault code menu, and select the option to erase the stored code. After clearing the code, the vehicle should be driven to ensure that the fault does not reoccur.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.