P0C45 – BMW DTC

BMW DTC P0C45 – Hybrid/EV Battery Pack Coolant Temperature Sensor ‘A’ Circuit High

DTC P0C45 meaning on BMW

DTC P0C45 on a BMW indicates an issue with the Hybrid/EV Battery Pack Coolant Temperature Sensor ‘A’ Circuit registering a high voltage signal. This sensor is responsible for monitoring the temperature of the battery pack coolant in hybrid or electric vehicles.

BMW DTC P0C45 symptoms

Symptoms of DTC P0C45 on a BMW may include:

• Check Engine Light illuminated
• Inaccurate temperature readings on the dashboard
• Reduced fuel efficiency in hybrid vehicles
• Possible engine overheating in severe cases

BMW DTC P0C45 causes

Common causes of DTC P0C45 on a BMW include:

• Faulty Hybrid/EV Battery Pack Coolant Temperature Sensor ‘A’
• Wiring issues or poor connections in the sensor circuit
• Corrosion or damage to sensor connectors
• Issues with the battery pack coolant system

BMW DTC P0C45 seriousness

The seriousness of DTC P0C45 on a BMW depends on the underlying cause and the extent of the issue. Ignoring this fault can lead to potential overheating of the battery pack coolant, affecting the performance and safety of the vehicle.

How to diagnose DTC P0C45 on BMW

To diagnose DTC P0C45 on a BMW, follow these steps:

1. Use a diagnostic scanner to retrieve the fault codes
2. Inspect the Hybrid/EV Battery Pack Coolant Temperature Sensor ‘A’ and its wiring for any visible damage
3. Check the sensor’s resistance and voltage readings using a multimeter
4. Verify the coolant temperature values with a thermal imaging camera

How to fix DTC P0C45 on BMW

To fix DTC P0C45 on a BMW, consider the following:

1. Replace the faulty Hybrid/EV Battery Pack Coolant Temperature Sensor ‘A’
2. Repair any damaged wiring or connectors in the sensor circuit
3. Flush and refill the battery pack coolant system if necessary
4. Clear the fault codes and perform a test drive to ensure the issue is resolved

How to erase DTC P0C45 on BMW

To erase DTC P0C45 on a BMW, you can:

1. Use a diagnostic scanner to clear the fault codes
2. Disconnect the vehicle’s battery for a few minutes to reset the system
3. Ensure the underlying issue has been fixed before clearing the fault codes

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.