BMW DTC P0C84 – Hybrid/EV Battery Temperature Sensor ‘H’ Circuit High
DTC P0C84 meaning on BMW
DTC P0C84 on a BMW indicates a fault with the Hybrid/EV Battery Temperature Sensor ‘H’ Circuit High. This means that the signal from the temperature sensor located in the hybrid or electric vehicle battery pack is reading a higher voltage than expected by the Engine Control Module (ECM).
BMW DTC P0C84 symptoms
Symptoms of DTC P0C84 in a BMW may include:
- Check Engine Light (CEL) illuminated
- Reduced hybrid or electric vehicle performance
- Possible overheating of the battery pack
BMW DTC P0C84 causes
Common causes of DTC P0C84 on a BMW include:
- Faulty Hybrid/EV Battery Temperature Sensor ‘H’
- Wiring or connection issues in the sensor circuit
- ECM software or hardware problems
BMW DTC P0C84 seriousness
The seriousness of DTC P0C84 on a BMW should not be ignored, as it can lead to potential issues with the hybrid or electric vehicle system. Driving with a faulty temperature sensor can cause overheating of the battery pack, affecting performance and potentially leading to more severe problems.
How to diagnose DTC P0C84 on BMW
To diagnose DTC P0C84 on a BMW, a mechanic would typically perform the following steps:
- Use a diagnostic scanner to retrieve the fault code and freeze frame data
- Inspect the Hybrid/EV Battery Temperature Sensor ‘H’ and its wiring for any visible damage
- Test the sensor’s resistance and voltage output to determine if it is functioning correctly
- Check for any ECM software updates or reprogramming that may be required
How to fix DTC P0C84 on BMW
To fix DTC P0C84 on a BMW, the following steps may be taken:
- Replace the faulty Hybrid/EV Battery Temperature Sensor ‘H’
- Repair any damaged wiring or connections in the sensor circuit
- If necessary, update or reprogram the ECM with the latest software
How to erase DTC P0C84 on BMW
To erase DTC P0C84 on a BMW, the fault code can be cleared using a diagnostic scanner. After the repair or replacement of the faulty components, the code can be reset, and the Check Engine Light should turn off if the issue has been successfully resolved.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.