P0E02 – BMW DTC

BMW DTC P0E02 – Generator Phase U Current Sensor Circuit Low

DTC P0E02 meaning on BMW

The Diagnostic Trouble Code (DTC) P0E02 for BMW refers to the Generator Phase U Current Sensor Circuit Low. This code indicates that the current sensor circuit for phase U of the generator is detecting a lower than expected voltage or current level.

BMW DTC P0E02 symptoms

Symptoms of the BMW DTC P0E02 may include:

• Malfunction indicator lamp (MIL) or check engine light illuminated on the dashboard
• Generator not charging the battery properly
• Electrical system issues

BMW DTC P0E02 causes

Common causes of the BMW DTC P0E02 may include:

• Faulty generator phase U current sensor
• Wiring or connection issues in the current sensor circuit
• Generator phase U current sensor circuit short to ground

BMW DTC P0E02 seriousness

The BMW DTC P0E02 should be addressed promptly as it can lead to charging system malfunctions and potential battery drain issues. Ignoring this code may result in the vehicle not starting or stalling due to a lack of electrical power.

How to diagnose DTC P0E02 on BMW

To diagnose the DTC P0E02 on a BMW, you can follow these steps:

1. Use a diagnostic scanner to retrieve the fault codes and verify the presence of P0E02.
2. Inspect the generator phase U current sensor and its wiring for any visible damage or corrosion.
3. Test the current sensor using a multimeter to check for proper voltage and resistance readings.
4. Check for any loose connections or shorts in the current sensor circuit.

How to fix DTC P0E02 on BMW

To fix the DTC P0E02 on a BMW, you can try the following:

1. Replace the faulty generator phase U current sensor with a new one.
2. Repair any damaged wiring or connections in the current sensor circuit.
3. Clean any corrosion or debris from the sensor and its connectors.
4. Clear the fault codes using a diagnostic scanner after the repairs are completed.

How to erase DTC P0E02 on BMW

To erase the DTC P0E02 on a BMW, you can use a diagnostic scanner to clear the fault codes stored in the vehicle’s computer. Follow these steps:

1. Connect the diagnostic scanner to the OBD-II port of the BMW.
2. Select the option to erase fault codes or clear DTCs from the scanner menu.
3. Wait for the scanner to communicate with the vehicle’s computer and erase the P0E02 code.
4. Verify that the code has been successfully cleared by checking for any remaining fault codes.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.