BMW DTC P0E26 – Drive Motor Inverter Temperature Sensor ‘G’ Circuit High
DTC P0E26 meaning on BMW
The Diagnostic Trouble Code (DTC) P0E26 for BMW refers to the Drive Motor Inverter Temperature Sensor ‘G’ Circuit High. This code indicates that the signal from the temperature sensor ‘G’ in the drive motor inverter is reading higher than the specified threshold, suggesting a potential issue with the sensor or its circuit.
BMW DTC P0E26 symptoms
Symptoms associated with the BMW DTC P0E26 may include:
- Check Engine Light (MIL) illuminated on the dashboard
- Reduced power or performance from the drive motor
- Increased temperature readings on the inverter system
BMW DTC P0E26 causes
Common causes of the BMW DTC P0E26 may include:
- Failed drive motor inverter temperature sensor ‘G’
- Wiring or connection issues in the sensor circuit
- Faulty drive motor inverter
BMW DTC P0E26 seriousness
The seriousness of the BMW DTC P0E26 code lies in the potential impact on the drive motor’s performance and efficiency. Ignoring this code may lead to further damage to the drive motor inverter system and could result in costly repairs if left unresolved.
How to diagnose DTC P0E26 on BMW
To diagnose the DTC P0E26 on a BMW, you can follow these steps:
- Use a diagnostic scanner to retrieve the fault codes and verify the presence of P0E26.
- Inspect the drive motor inverter temperature sensor ‘G’ and its wiring for any visible damage or corrosion.
- Check the sensor’s resistance and compare it to the manufacturer’s specifications to determine if it is faulty.
- Test the sensor circuit for continuity and proper voltage supply.
How to fix DTC P0E26 on BMW
To fix the DTC P0E26 on a BMW, you can consider the following actions:
- Replace the drive motor inverter temperature sensor ‘G’ if it is found to be faulty.
- Repair any damaged wiring or connections in the sensor circuit.
- If the drive motor inverter is faulty, it may need to be replaced or repaired by a professional.
How to erase DTC P0E26 on BMW
To erase the DTC P0E26 on a BMW, you can use a diagnostic scanner to clear the fault codes stored in the vehicle’s system. After addressing and fixing the underlying issue that triggered the code, you can reset the codes to turn off the Check Engine Light and ensure proper operation of the drive motor inverter system.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.