P0E4C – BMW DTC

BMW DTC P0E4C – Hybrid/EV Battery Pack Voltage Sense ‘F’ Circuit High

DTC P0E4C meaning on BMW

DTC P0E4C for BMW refers to the Hybrid/EV Battery Pack Voltage Sense ‘F’ Circuit High. This diagnostic trouble code indicates that there is a high voltage reading detected in the ‘F’ circuit of the hybrid or electric vehicle battery pack voltage sensor.

BMW DTC P0E4C symptoms

Symptoms of DTC P0E4C on a BMW may include:

• Check Engine Light (MIL) illuminated
• Reduced hybrid or electric vehicle performance
• Decreased fuel efficiency
• Possible drivability issues

BMW DTC P0E4C causes

Common causes of DTC P0E4C on a BMW include:

• Faulty hybrid or electric vehicle battery pack voltage sensor
• Wiring or connection issues in the ‘F’ circuit
• Corrosion or damage to sensor connectors
• Internal battery pack voltage sensor module fault

BMW DTC P0E4C seriousness

The seriousness of DTC P0E4C on a BMW can vary. While the vehicle may still be operable with this code present, it is important to address the underlying issue promptly to prevent potential damage to the hybrid or electric vehicle system.

How to diagnose DTC P0E4C on BMW

To diagnose DTC P0E4C on a BMW, a mechanic may perform the following steps:

1. Use a diagnostic scan tool to retrieve the fault code and related data
2. Inspect the hybrid or electric vehicle battery pack voltage sensor and its wiring for any visible damage
3. Test the sensor’s voltage output using a multimeter
4. Check for any loose or corroded connections in the ‘F’ circuit

How to fix DTC P0E4C on BMW

To fix DTC P0E4C on a BMW, the following steps may be taken:

1. Replace the faulty hybrid or electric vehicle battery pack voltage sensor
2. Repair any damaged wiring or connectors in the ‘F’ circuit
3. If the sensor module is at fault, replace the entire battery pack voltage sensor assembly
4. Clear the fault code using a diagnostic scan tool after the repair is completed

How to erase DTC P0E4C on BMW

To erase DTC P0E4C on a BMW, follow these steps:

1. Connect a diagnostic scan tool to the vehicle’s OBD-II port
2. Access the tool’s menu to clear the fault codes stored in the vehicle’s system
3. Follow the on-screen prompts to erase the DTC P0E4C code
4. Ensure that the issue causing the fault code has been resolved before clearing it

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.