BMW DTC P0E50 – Motor Electronics Coolant Pump ‘B’ Control Circuit Intermittent/Erratic
DTC P0E50 meaning on BMW
The DTC P0E50 code for BMW indicates an intermittent or erratic control circuit issue related to the Motor Electronics Coolant Pump ‘B’. This fault code is specific to the control circuit of the coolant pump and signifies a problem with the electrical signals or communication within the system.
BMW DTC P0E50 symptoms
Symptoms associated with the BMW DTC P0E50 code may include:
- Engine overheating
- Decreased engine performance
- Check Engine Light (CEL) illuminated on the dashboard
- Irregular coolant pump operation
BMW DTC P0E50 causes
Potential causes of the BMW DTC P0E50 code include:
- Faulty coolant pump ‘B’
- Wiring or connector issues in the control circuit
- Defective Motor Electronics Coolant Pump control module
- Intermittent electrical connection problems
BMW DTC P0E50 seriousness
The DTC P0E50 code should not be ignored as it can lead to engine overheating and potential damage if the coolant pump ‘B’ is not functioning correctly. It is important to address this issue promptly to prevent further complications.
How to diagnose DTC P0E50 on BMW
To diagnose the DTC P0E50 on a BMW, a mechanic may perform the following steps:
- Use a diagnostic scanner to retrieve the fault codes and freeze frame data
- Inspect the wiring and connectors in the coolant pump ‘B’ control circuit for any visible damage or corrosion
- Test the Motor Electronics Coolant Pump control module for proper functionality
- Check the operation of the coolant pump ‘B’ to ensure it is functioning correctly
How to fix DTC P0E50 on BMW
To fix the DTC P0E50 on a BMW, the following steps may be taken:
- Replace the faulty coolant pump ‘B’ if it is determined to be the cause of the issue
- Repair or replace any damaged wiring or connectors in the control circuit
- Replace the Motor Electronics Coolant Pump control module if found to be defective
- Clear the fault codes and perform a test drive to ensure the issue has been resolved
How to erase DTC P0E50 on BMW
To erase the DTC P0E50 code on a BMW, the fault codes can be cleared using a diagnostic scanner. After the necessary repairs have been made to address the underlying issue, the fault codes can be reset to turn off the Check Engine Light and ensure the system is functioning properly.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.