P0E97 – BMW DTC

BMW DTC P0E97 – DC/DC Converter Voltage Sensor ‘C’ Circuit Range/Performance

DTC P0E97 meaning on BMW

The DTC P0E97 code on a BMW indicates an issue with the DC/DC converter voltage sensor ‘C’ circuit. This code is triggered when the powertrain control module (PCM) detects that the voltage signal from the sensor is outside the expected range or performance parameters.

BMW DTC P0E97 symptoms

Symptoms of the DTC P0E97 code on a BMW may include:

• Check Engine Light (CEL) illuminated on the dashboard
• Reduced fuel efficiency
• Engine performance issues
• Vehicle may go into a reduced power mode

BMW DTC P0E97 causes

Common causes of the DTC P0E97 code on a BMW include:

• Faulty DC/DC converter voltage sensor ‘C’
• Wiring or connection issues in the sensor circuit
• PCM software issues

BMW DTC P0E97 seriousness

The DTC P0E97 code should not be ignored as it can lead to drivability issues and potentially cause further damage to the vehicle if left unresolved. It is recommended to address this issue promptly to prevent any long-term problems.

How to diagnose DTC P0E97 on BMW

To diagnose the DTC P0E97 code on a BMW, a mechanic would typically perform the following steps:

1. Use a diagnostic scanner to retrieve the fault codes stored in the PCM
2. Inspect the DC/DC converter voltage sensor ‘C’ and its wiring for any visible damage or corrosion
3. Test the sensor’s voltage output using a multimeter to ensure it is within specifications
4. Check for any loose connections or poor grounds in the sensor circuit

How to fix DTC P0E97 on BMW

To fix the DTC P0E97 code on a BMW, the following steps may be taken:

1. Replace the faulty DC/DC converter voltage sensor ‘C’
2. Repair any damaged wiring or connections in the sensor circuit
3. Clear the fault codes using a diagnostic scanner after the repairs have been completed
4. Perform a test drive to ensure the issue has been resolved

How to erase DTC P0E97 on BMW

To erase the DTC P0E97 code on a BMW, follow these steps:

1. Use a diagnostic scanner to access the PCM and navigate to the fault code menu
2. Select the option to clear the fault codes stored in the system
3. Confirm the action and wait for the scanner to complete the process
4. Turn off the ignition and restart the vehicle to ensure the code has been successfully erased

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.