P0EAF – BMW DTC

BMW DTC P0EAF – A/C Compressor Motor Current Sensor Circuit Low

DTC P0EAF meaning on BMW

DTC P0EAF on a BMW indicates an issue with the A/C compressor motor current sensor circuit registering a low voltage. This fault code is specific to the A/C compressor motor current sensor circuit.

BMW DTC P0EAF symptoms

Symptoms of the BMW DTC P0EAF may include:

• Malfunctioning air conditioning system
• Reduced cooling performance
• Check Engine Light (CEL) illuminated on the dashboard

BMW DTC P0EAF causes

Common causes of the BMW DTC P0EAF may include:

• Defective A/C compressor motor current sensor
• Wiring issues in the A/C compressor motor current sensor circuit
• Faulty connections or poor electrical connections

BMW DTC P0EAF seriousness

The BMW DTC P0EAF should be addressed promptly as it can lead to poor A/C performance and discomfort while driving, especially in hot weather conditions. Ignoring this fault may result in further damage to the A/C system.

How to diagnose DTC P0EAF on BMW

To diagnose the DTC P0EAF on a BMW, a mechanic may perform the following steps:

1. Use a diagnostic scanner to retrieve the fault code and related data
2. Inspect the A/C compressor motor current sensor and its wiring for any visible damage
3. Test the sensor’s voltage and resistance to determine if it is functioning correctly
4. Check for loose or corroded connections in the circuit

How to fix DTC P0EAF on BMW

To fix the DTC P0EAF on a BMW, the following steps may be taken:

1. Replace the faulty A/C compressor motor current sensor if it is determined to be the cause
2. Repair any damaged wiring or connections in the sensor circuit
3. Clear the fault code and reset the system
4. Test the A/C system to ensure proper functionality

How to erase DTC P0EAF on BMW

To erase the DTC P0EAF on a BMW, follow these steps:

1. Use a diagnostic scanner to clear the fault code from the vehicle’s memory
2. Ensure that the underlying issue causing the fault code has been resolved
3. Perform a test drive to confirm that the fault code does not reappear

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.