P0EB0 – BMW DTC

BMW DTC P0EB0 – A/C Compressor Motor Current Sensor Circuit High

DTC P0EB0 meaning on BMW

DTC P0EB0 on a BMW indicates a fault with the A/C compressor motor current sensor circuit. This fault code is triggered when the powertrain control module (PCM) detects a high voltage signal from the A/C compressor motor current sensor, indicating an issue with the sensor or its circuit.

BMW DTC P0EB0 symptoms

Symptoms of DTC P0EB0 on a BMW may include:

• Malfunctioning air conditioning system
• Check Engine Light (CEL) illuminated on the dashboard
• Reduced cooling performance

BMW DTC P0EB0 causes

Common causes of DTC P0EB0 on a BMW include:

• Faulty A/C compressor motor current sensor
• Short circuit or open circuit in the sensor circuit
• Corrosion or poor connections in the sensor wiring

BMW DTC P0EB0 seriousness

While DTC P0EB0 may not cause immediate drivability issues, it can affect the proper functioning of the air conditioning system in the vehicle. Ignoring this fault code may lead to discomfort during hot weather or reduced defrosting capabilities in colder conditions.

How to diagnose DTC P0EB0 on BMW

To diagnose DTC P0EB0 on a BMW, follow these steps:

1. Use a diagnostic scanner to retrieve the fault code and freeze frame data.
2. Inspect the A/C compressor motor current sensor and its wiring for any visible damage or corrosion.
3. Test the sensor’s resistance and voltage output according to the manufacturer’s specifications.
4. Check for continuity and proper connections in the sensor circuit.

How to fix DTC P0EB0 on BMW

To fix DTC P0EB0 on a BMW, consider the following:

1. Replace the faulty A/C compressor motor current sensor if it fails testing.
2. Repair any damaged wiring or connectors in the sensor circuit.
3. Clear the fault code and perform a test drive to ensure the issue is resolved.

How to erase DTC P0EB0 on BMW

To erase DTC P0EB0 on a BMW:

1. Use a diagnostic scanner to clear the fault code from the PCM memory.
2. If the underlying issue has been fixed, the Check Engine Light should turn off after clearing the code.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.