P0EB6 – BMW DTC

BMW DTC P0EB6 – A/C Compressor Motor Phase V Current Sensor Circuit Low

DTC P0EB6 meaning on BMW

The DTC P0EB6 on a BMW indicates an issue with the A/C compressor motor phase V current sensor circuit registering a low voltage. This fault code is specific to the air conditioning system of the vehicle.

BMW DTC P0EB6 symptoms

Symptoms of the BMW DTC P0EB6 may include the air conditioning system not functioning properly, reduced cooling performance, or the A/C compressor not engaging when commanded.

BMW DTC P0EB6 causes

The causes of the BMW DTC P0EB6 can vary and may include a faulty A/C compressor motor, damaged wiring or connectors in the sensor circuit, or a malfunctioning phase V current sensor.

BMW DTC P0EB6 seriousness

While the DTC P0EB6 may not directly affect the drivability of the vehicle, it can lead to discomfort due to the air conditioning system not working correctly. It is recommended to address this issue to ensure proper cooling performance.

How to diagnose DTC P0EB6 on BMW

1. Use a diagnostic scanner to retrieve the fault codes from the BMW’s A/C system.
2. Inspect the wiring and connectors related to the A/C compressor motor phase V current sensor circuit for any visible damage or corrosion.
3. Test the phase V current sensor for proper operation using a multimeter.
4. Check the A/C compressor motor for any signs of failure or malfunction.

How to fix DTC P0EB6 on BMW

1. Repair or replace any damaged wiring or connectors in the A/C compressor motor phase V current sensor circuit.
2. Replace the phase V current sensor if it is found to be faulty.
3. If the A/C compressor motor is defective, it may need to be replaced.
4. Clear the fault codes using a diagnostic scanner after completing the repairs.

How to erase DTC P0EB6 on BMW

To erase the DTC P0EB6 on a BMW, follow these steps:

1. Ensure that the underlying issue causing the fault code has been resolved.
2. Use a diagnostic scanner to access the BMW’s A/C system and navigate to the fault code section.
3. Select the option to clear the fault codes, which should include the DTC P0EB6.
4. Confirm the deletion of the fault code and verify that it has been successfully erased.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.