BMW DTC P1004 – VVL-Guiding Sensor Solenoid Loss (Bank 1)
DTC P1004 meaning on BMW
The Diagnostic Trouble Code (DTC) P1004 for BMW refers to the VVL-Guiding Sensor Solenoid Loss on Bank 1. This code indicates that there is a malfunction or loss of signal from the Variable Valve Lift (VVL) system’s guiding sensor solenoid on the bank 1 side of the engine.
BMW DTC P1004 symptoms
Symptoms of DTC P1004 on a BMW may include:
- Check Engine Light (CEL) illuminated on the dashboard
- Reduced engine performance
- Engine misfires
- Rough idling or stalling
BMW DTC P1004 causes
Common causes of DTC P1004 on a BMW include:
- Faulty VVL-Guiding Sensor Solenoid
- Wiring or connector issues in the VVL system
- Low engine oil level or poor oil quality
- Mechanical issues in the VVL system
BMW DTC P1004 seriousness
The seriousness of DTC P1004 on a BMW depends on the underlying cause. Ignoring this code can lead to further engine damage, reduced fuel efficiency, and potential drivability issues. It is recommended to address this code promptly to prevent any long-term issues.
How to diagnose DTC P1004 on BMW
To diagnose DTC P1004 on a BMW, you can follow these steps:
- Use a diagnostic scanner to retrieve the fault codes
- Inspect the VVL-Guiding Sensor Solenoid and its wiring for any visible damage
- Check the engine oil level and quality
- Perform a visual inspection of the VVL system components
How to fix DTC P1004 on BMW
To fix DTC P1004 on a BMW, you can try the following:
- Replace the faulty VVL-Guiding Sensor Solenoid
- Repair any damaged wiring or connectors in the VVL system
- Ensure the engine oil level is correct and of good quality
- If mechanical issues are found, consult a professional mechanic for further diagnosis and repair
How to erase DTC P1004 on BMW
To erase DTC P1004 on a BMW, you can use a diagnostic scanner to clear the fault codes stored in the vehicle’s Engine Control Module (ECM). Once the codes are cleared, you can drive the vehicle and monitor for any recurrence of the code. If the issue persists, further diagnosis and repair may be necessary.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.