P1041 – BMW DTC

BMW DTC P1041 – Internal VVL-Control Module EEPROM Error

DTC P1041 meaning on BMW

The Diagnostic Trouble Code (DTC) P1041 for BMW indicates an Internal Variable Valve Lift (VVL) Control Module EEPROM Error. This error pertains to a fault in the electronic control module that manages the variable valve lift system in the engine.

BMW DTC P1041 symptoms

Symptoms of the DTC P1041 on a BMW may include:

• Check Engine Light (CEL) illuminated on the dashboard
• Reduced engine performance or power
• Engine misfires or rough idling
• Decreased fuel efficiency

BMW DTC P1041 causes

The DTC P1041 in a BMW can be triggered by various factors, including:

• Corrupted or faulty data in the VVL control module’s EEPROM
• Wiring issues or poor connections in the VVL control system
• Defective VVL control module

BMW DTC P1041 seriousness

The DTC P1041 error code should not be ignored as it can lead to engine performance issues and potential long-term damage if left unresolved. It is recommended to address this issue promptly to prevent further complications.

How to diagnose DTC P1041 on BMW

To diagnose the DTC P1041 on a BMW, a mechanic would typically perform the following steps:

1. Use a diagnostic scanner to retrieve the specific fault code
2. Inspect the wiring and connections related to the VVL control module
3. Check the VVL control module for any signs of damage or malfunction
4. Test the EEPROM data integrity within the VVL control module

How to fix DTC P1041 on BMW

Resolving the DTC P1041 error on a BMW may involve the following steps:

1. Repair or replace any damaged wiring or connections in the VVL control system
2. Replace the VVL control module if found to be faulty
3. Reprogram or reflash the EEPROM data in the VVL control module
4. Clear the fault code and reset the Check Engine Light using a diagnostic scanner

How to erase DTC P1041 on BMW

To erase the DTC P1041 on a BMW, follow these steps:

1. Use a diagnostic scanner to access the vehicle’s onboard computer system
2. Select the option to clear the fault codes stored in the system
3. Confirm the deletion of the DTC P1041 code
4. Turn off the ignition and restart the vehicle to ensure the code has been successfully erased

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.