BMW DTC P10A4 – Cold Start Intake Air Temperature Too Low (Bank 2)
DTC P10A4 meaning on BMW
DTC P10A4 on a BMW indicates that the cold start intake air temperature is too low in Bank 2 of the engine. This fault code is specific to the intake air temperature sensor reading being outside of the normal operating range during cold start conditions.
BMW DTC P10A4 symptoms
Symptoms of DTC P10A4 on a BMW may include hard starting, rough idling, decreased engine performance, and potentially an illuminated check engine light on the dashboard.
BMW DTC P10A4 causes
The common causes of DTC P10A4 on a BMW can include a faulty intake air temperature sensor, wiring issues in the sensor circuit, or a problem with the engine control module (ECM) not receiving the correct signal from the sensor.
BMW DTC P10A4 seriousness
While DTC P10A4 may not cause immediate drivability issues, it can affect the engine’s performance during cold starts and potentially lead to increased emissions. Ignoring this fault code can result in decreased fuel efficiency and overall engine health.
How to diagnose DTC P10A4 on BMW
To diagnose DTC P10A4 on a BMW, a mechanic would typically use a diagnostic scanner to retrieve the fault code and then perform a visual inspection of the intake air temperature sensor and its wiring. Testing the sensor’s resistance and checking for any loose connections or damaged wires can help pinpoint the issue.
How to fix DTC P10A4 on BMW
Fixing DTC P10A4 on a BMW usually involves replacing the faulty intake air temperature sensor, repairing any damaged wiring, or addressing any issues with the engine control module. Once the root cause is identified and resolved, clearing the fault code and performing a test drive to ensure the issue is fixed is recommended.
How to erase DTC P10A4 on BMW
To erase DTC P10A4 on a BMW, a diagnostic scanner can be used to clear the fault code from the ECM’s memory. After the repair has been completed and the issue resolved, clearing the code will reset the system and turn off the check engine light.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.