BMW DTC P10C2 – Fuel Volume Regulator Safety Relay Control Circuit Low
DTC P10C2 meaning on BMW
The Diagnostic Trouble Code (DTC) P10C2 for BMW refers to the Fuel Volume Regulator Safety Relay Control Circuit Low. This code indicates that there is a problem with the control circuit of the fuel volume regulator safety relay, specifically that the voltage in the circuit is lower than the specified threshold.
BMW DTC P10C2 symptoms
Symptoms of the BMW DTC P10C2 may include:
- Check Engine Light (MIL) illuminated on the dashboard
- Engine running rough or misfiring
- Reduced engine performance
- Difficulty starting the engine
BMW DTC P10C2 causes
Common causes of the BMW DTC P10C2 may include:
- Faulty fuel volume regulator safety relay
- Short circuit or open circuit in the relay control circuit
- Faulty wiring or connectors in the circuit
- Issues with the Engine Control Module (ECM)
BMW DTC P10C2 seriousness
The BMW DTC P10C2 should be addressed promptly as it can lead to drivability issues and potentially cause further damage to the engine if left unresolved. Ignoring this code may result in poor engine performance and decreased fuel efficiency.
How to diagnose DTC P10C2 on BMW
To diagnose the DTC P10C2 on a BMW, a mechanic would typically perform the following steps:
- Use a diagnostic scanner to retrieve the fault codes stored in the ECM
- Inspect the fuel volume regulator safety relay and its control circuit for any visible damage or corrosion
- Check the wiring and connectors associated with the relay for continuity and proper connection
- Test the relay and circuit for proper voltage and resistance values
- Inspect the ECM for any signs of malfunction
How to fix DTC P10C2 on BMW
To fix the DTC P10C2 on a BMW, the following steps may be taken:
- Replace the faulty fuel volume regulator safety relay if necessary
- Repair any damaged wiring or connectors in the relay control circuit
- Clear the fault codes from the ECM memory after the repairs have been completed
- Perform a test drive to ensure the issue has been resolved
How to erase DTC P10C2 on BMW
To erase the DTC P10C2 on a BMW, the fault codes can be cleared using a diagnostic scanner. After the necessary repairs have been made to address the underlying issue, the mechanic can use the scanner to reset the codes stored in the ECM. It is important to ensure that the repairs have been successful before clearing the fault codes to prevent the issue from recurring.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.