P10E2 – BMW DTC

BMW DTC P10E2 – VVL-Sensors Supply Voltage Circuit Electrical (Bank 1)

DTC P10E2 meaning on BMW

The DTC P10E2 on a BMW refers to a fault in the Variable Valve Lift (VVL) sensors supply voltage circuit for Bank 1. This fault indicates an electrical issue related to the sensors responsible for controlling the variable valve lift system in the engine.

BMW DTC P10E2 symptoms

Symptoms of the DTC P10E2 on a BMW may include:

• Check Engine Light (CEL) illuminated on the dashboard
• Reduced engine performance
• Engine misfires
• Engine stalling

BMW DTC P10E2 causes

Common causes of the DTC P10E2 on a BMW include:

• Faulty VVL sensors
• Wiring or connector issues in the VVL sensors circuit
• Power supply problems to the VVL sensors

BMW DTC P10E2 seriousness

The DTC P10E2 should be addressed promptly as it can lead to engine performance issues and potential drivability problems. Ignoring this fault may result in further damage to engine components.

How to diagnose DTC P10E2 on BMW

To diagnose the DTC P10E2 on a BMW, follow these steps:

1. Use a diagnostic scanner to retrieve the fault codes and confirm the presence of DTC P10E2.
2. Inspect the wiring and connectors related to the VVL sensors for any visible damage or corrosion.
3. Check the power supply to the VVL sensors to ensure proper voltage is reaching the sensors.
4. Perform a continuity test on the sensor circuits to identify any open or short circuits.

How to fix DTC P10E2 on BMW

To fix the DTC P10E2 on a BMW, consider the following steps:

1. Replace any faulty VVL sensors identified during the diagnostic process.
2. Repair or replace any damaged wiring or connectors in the VVL sensors circuit.
3. Ensure the power supply to the VVL sensors is functioning correctly.
4. Clear the fault codes using a diagnostic scanner after completing the repairs.

How to erase DTC P10E2 on BMW

To erase the DTC P10E2 on a BMW, follow these steps:

1. Connect a diagnostic scanner to the vehicle’s OBD-II port.
2. Access the scanner’s menu to clear the fault codes stored in the vehicle’s ECU.
3. Follow the on-screen prompts to erase the DTC P10E2 code.
4. Once the code is cleared, start the vehicle to ensure the Check Engine Light is no longer illuminated.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.