BMW DTC P1132 – O2 Sensor Heater Control Circuit (Bank 1 Sensor 1)
DTC P1132 meaning on BMW
The Diagnostic Trouble Code (DTC) P1132 for BMW refers to an issue with the O2 Sensor Heater Control Circuit for Bank 1 Sensor 1. This code indicates that there is a malfunction in the circuit responsible for heating the oxygen sensor located in the exhaust system before the catalytic converter on the bank 1 side of the engine.
BMW DTC P1132 symptoms
Symptoms of DTC P1132 on a BMW may include:
- Check Engine Light (CEL) illuminated on the dashboard
- Poor fuel economy
- Engine running rough or misfiring
- Reduced engine performance
BMW DTC P1132 causes
The common causes of DTC P1132 on a BMW include:
- Faulty O2 sensor heater circuit
- Wiring or connector issues in the O2 sensor heater circuit
- Defective O2 sensor
- Issues with the engine control module (ECM)
BMW DTC P1132 seriousness
While DTC P1132 may not cause immediate drivability issues, it is important to address this problem promptly to prevent potential damage to the catalytic converter and ensure optimal engine performance and fuel efficiency.
How to diagnose DTC P1132 on BMW
To diagnose DTC P1132 on a BMW, you can follow these steps:
- Use an OBD-II scanner to retrieve the fault code and verify the presence of DTC P1132.
- Inspect the wiring and connectors in the O2 sensor heater circuit for any damage or corrosion.
- Test the O2 sensor heater circuit for continuity and proper voltage supply.
- If necessary, perform a resistance test on the O2 sensor heater to check for proper functionality.
How to fix DTC P1132 on BMW
To fix DTC P1132 on a BMW, you can consider the following solutions:
- Replace the faulty O2 sensor if it is determined to be the cause of the issue.
- Repair or replace any damaged wiring or connectors in the O2 sensor heater circuit.
- If the ECM is suspected to be the problem, have it diagnosed and repaired by a professional.
How to erase DTC P1132 on BMW
To erase DTC P1132 on a BMW, you can clear the fault code using an OBD-II scanner or by disconnecting the vehicle’s battery for a few minutes. However, it is recommended to address the underlying issue causing the fault code before clearing it to prevent it from reoccurring.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.