BMW DTC P1179 – O2 Sensor Signal Circuit Slow Switching from Rich to Lean (Bank 2 Sensor 1)
DTC P1179 meaning on BMW
DTC P1179 on a BMW indicates an issue with the O2 sensor signal circuit slow switching from rich to lean for Bank 2 Sensor 1. This means that the oxygen sensor located before the catalytic converter on the second bank of cylinders is not functioning properly in terms of switching between rich (too much fuel) and lean (too little fuel) air-fuel mixtures.
BMW DTC P1179 symptoms
Symptoms of DTC P1179 on a BMW may include poor fuel economy, rough idling, engine misfires, hesitation during acceleration, and potentially an illuminated Check Engine Light on the dashboard.
BMW DTC P1179 causes
The causes of DTC P1179 on a BMW can vary, but common reasons include a faulty O2 sensor, wiring issues in the sensor circuit, vacuum leaks, exhaust leaks, or a problem with the engine’s air-fuel mixture.
BMW DTC P1179 seriousness
While DTC P1179 may not cause immediate drivability issues, it can lead to decreased fuel efficiency and potentially harm the catalytic converter over time if left unresolved. It is recommended to address this issue promptly.
How to diagnose DTC P1179 on BMW
To diagnose DTC P1179 on a BMW, a mechanic would typically use a diagnostic scanner to retrieve the fault code and then perform further testing on the O2 sensor, wiring, and related components to pinpoint the exact cause of the slow switching signal.
- Check the O2 sensor for proper operation
- Inspect the wiring and connectors for any damage or corrosion
- Look for vacuum leaks or exhaust leaks that could affect sensor readings
- Verify the air-fuel mixture is within specifications
How to fix DTC P1179 on BMW
Fixing DTC P1179 on a BMW typically involves addressing the root cause of the slow switching signal from rich to lean on Bank 2 Sensor 1. Depending on the issue, potential solutions may include:
- Replacing the faulty O2 sensor
- Repairing or replacing damaged wiring or connectors
- Fixing any vacuum or exhaust leaks
- Adjusting the air-fuel mixture as needed
How to erase DTC P1179 on BMW
Once the underlying issue causing DTC P1179 on a BMW has been resolved, the fault code can be cleared using a diagnostic scanner. This will erase the code from the vehicle’s memory and turn off the Check Engine Light. It is important to ensure that the repair has been successful before clearing the code.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.