BMW DTC P1180 – O2 Sensor Signal Circuit Slow Switching from Rich to Lean (Bank 1 Sensor 2)
DTC P1180 meaning on BMW
The Diagnostic Trouble Code (DTC) P1180 for BMW indicates an issue with the O2 sensor signal circuit slow switching from rich to lean on Bank 1 Sensor 2. This means that the oxygen sensor located downstream of the catalytic converter on the bank 1 side of the engine is not functioning properly in terms of switching between rich (high fuel concentration) and lean (low fuel concentration) air-fuel mixtures.
BMW DTC P1180 symptoms
Symptoms associated with DTC P1180 on a BMW may include:
- Check Engine Light (CEL) illuminated on the dashboard
- Poor fuel economy
- Engine running rough or misfiring
- Reduced engine performance
BMW DTC P1180 causes
The common causes of DTC P1180 on a BMW include:
- Faulty Bank 1 Sensor 2 oxygen sensor
- Wiring or connector issues in the O2 sensor circuit
- Exhaust leaks near the O2 sensor
- Engine running rich due to a fuel system problem
BMW DTC P1180 seriousness
While DTC P1180 may not cause immediate drivability issues, it can lead to poor engine performance and reduced fuel efficiency if left unresolved. Ignoring this fault code may also result in potential damage to the catalytic converter over time.
How to diagnose DTC P1180 on BMW
To diagnose DTC P1180 on a BMW, you can perform the following steps:
- Use an OBD-II scanner to retrieve the fault code and freeze frame data
- Inspect the wiring and connectors of Bank 1 Sensor 2 for any damage or corrosion
- Check for exhaust leaks near the O2 sensor
- Test the Bank 1 Sensor 2 oxygen sensor using a multimeter or scan tool
How to fix DTC P1180 on BMW
To fix DTC P1180 on a BMW, you can try the following solutions:
- Replace the Bank 1 Sensor 2 oxygen sensor if it is faulty
- Repair any damaged wiring or connectors in the O2 sensor circuit
- Fix any exhaust leaks near the O2 sensor
- Address any underlying fuel system issues causing the engine to run rich
How to erase DTC P1180 on BMW
To erase DTC P1180 on a BMW, you can use an OBD-II scanner to clear the fault code from the vehicle’s computer. After fixing the underlying issue causing the fault code, clearing the code will reset the Check Engine Light and monitor the system for any recurring problems.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.