BMW DTC P11A1 – Throttle/Pedal Position Sensor/Switch Supply Voltage Circuit High (Bank 1)
DTC P11A1 meaning on BMW
The Diagnostic Trouble Code (DTC) P11A1 for BMW indicates an issue with the Throttle/Pedal Position Sensor/Switch Supply Voltage Circuit being too high in Bank 1. This means that the voltage supplied to the throttle or pedal position sensor/switch is exceeding the specified limit, causing the system to detect a fault.
BMW DTC P11A1 symptoms
Symptoms associated with the BMW DTC P11A1 may include:
- Check Engine Light (MIL) illuminated
- Reduced engine power
- Unresponsive throttle pedal
- Engine stalling or hesitation
BMW DTC P11A1 causes
Possible causes of the BMW DTC P11A1 include:
- Faulty throttle or pedal position sensor/switch
- Short circuit or open circuit in the sensor wiring
- Corrosion or poor connections in the sensor circuit
- Issues with the Engine Control Module (ECM)
BMW DTC P11A1 seriousness
The seriousness of the BMW DTC P11A1 lies in the potential for reduced engine performance and drivability issues. Ignoring this fault can lead to further damage to engine components and may result in unsafe driving conditions.
How to diagnose DTC P11A1 on BMW
To diagnose the DTC P11A1 on a BMW, a mechanic would typically perform the following steps:
- Use a diagnostic scanner to retrieve the fault codes
- Inspect the throttle and pedal position sensor/switch for any visible damage
- Check the sensor wiring for continuity and proper connections
- Test the voltage supply to the sensor/switch
- Perform a thorough inspection of the ECM and related components
How to fix DTC P11A1 on BMW
To fix the DTC P11A1 on a BMW, the following steps may be taken:
- Replace the faulty throttle or pedal position sensor/switch
- Repair any damaged wiring or connections in the sensor circuit
- Clean or replace corroded connectors
- Reset the fault codes and perform a test drive to ensure the issue is resolved
How to erase DTC P11A1 on BMW
To erase the DTC P11A1 on a BMW, the fault codes can be cleared using a diagnostic scanner. After the repair has been completed and the issue resolved, the codes can be reset to turn off the Check Engine Light and ensure that the fault does not reoccur.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.