P11A5 – BMW DTC

BMW DTC P11A5 – Pedal Position Sensor Supply Voltage Circuit High

DTC P11A5 meaning on BMW

DTC P11A5 in a BMW indicates an issue with the pedal position sensor supply voltage circuit being too high. The pedal position sensor is responsible for sending signals to the engine control module (ECM) regarding the position of the accelerator pedal. When the supply voltage to this sensor is too high, it can lead to incorrect readings and affect the vehicle’s performance.

BMW DTC P11A5 symptoms

Symptoms of DTC P11A5 in a BMW may include:

• Check Engine Light (CEL) illuminated on the dashboard
• Reduced engine power
• Acceleration issues
• Inconsistent throttle response

BMW DTC P11A5 causes

The possible causes of DTC P11A5 in a BMW include:

• Faulty pedal position sensor
• Short circuit in the sensor wiring
• Issues with the ECM
• High voltage in the sensor supply circuit

BMW DTC P11A5 seriousness

DTC P11A5 should be addressed promptly as it can lead to drivability issues and potentially affect the vehicle’s performance and safety. Ignoring this fault may result in further damage to engine components or drivetrain systems.

How to diagnose DTC P11A5 on BMW

To diagnose DTC P11A5 on a BMW, a mechanic would typically perform the following steps:

1. Use a diagnostic scanner to retrieve the fault code and related data
2. Inspect the pedal position sensor and its wiring for any visible damage or corrosion
3. Check the voltage supply to the sensor using a multimeter
4. Perform a thorough inspection of the ECM and related circuits

How to fix DTC P11A5 on BMW

To fix DTC P11A5 on a BMW, the following steps may be taken:

1. Replace the faulty pedal position sensor
2. Repair any damaged wiring or connectors in the sensor circuit
3. Reset the ECM and clear the fault code
4. Perform a test drive to ensure the issue has been resolved

How to erase DTC P11A5 on BMW

To erase DTC P11A5 on a BMW, you can use a diagnostic scanner to clear the fault code from the ECM’s memory. Once the repair has been completed and the underlying issue resolved, clearing the fault code will reset the Check Engine Light and ensure that the system is functioning properly.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.