P11AE – BMW DTC

BMW DTC P11AE – Manifold Absolute Pressure/Barometric Pressure Sensor Circuit High (Bank 2)

DTC P11AE meaning on BMW

The DTC P11AE error code on a BMW indicates an issue with the Manifold Absolute Pressure/Barometric Pressure Sensor Circuit High in Bank 2. This means that the sensor is detecting a higher than normal voltage signal, which could be caused by various factors affecting the sensor’s operation.

BMW DTC P11AE symptoms

Symptoms of the BMW DTC P11AE code may include:

• Check Engine Light illuminated on the dashboard
• Reduced engine performance
• Potential rough idling or stalling
• Decreased fuel efficiency

BMW DTC P11AE causes

Common causes of the BMW DTC P11AE code include:

• Faulty Manifold Absolute Pressure/Barometric Pressure Sensor
• Wiring or connector issues in the sensor circuit
• Vacuum leaks in the intake system
• Issues with the engine control module (ECM)

BMW DTC P11AE seriousness

The BMW DTC P11AE code should not be ignored, as it can lead to potential engine performance issues and decreased fuel efficiency. It is recommended to address this code promptly to prevent further damage to the vehicle.

How to diagnose DTC P11AE on BMW

To diagnose the DTC P11AE on a BMW, you can perform the following steps:

1. Use a diagnostic scanner to retrieve the specific fault codes stored in the vehicle’s ECM
2. Inspect the Manifold Absolute Pressure/Barometric Pressure Sensor and its wiring for any visible damage or corrosion
3. Check for vacuum leaks in the intake system
4. Test the sensor’s voltage output using a multimeter

How to fix DTC P11AE on BMW

To fix the DTC P11AE on a BMW, you can try the following solutions:

1. Replace the faulty Manifold Absolute Pressure/Barometric Pressure Sensor
2. Repair or replace any damaged wiring or connectors in the sensor circuit
3. Address any vacuum leaks in the intake system
4. If necessary, reprogram or replace the engine control module (ECM)

How to erase DTC P11AE on BMW

To erase the DTC P11AE code on a BMW, you can:

1. Use a diagnostic scanner to clear the fault codes stored in the ECM
2. After fixing the underlying issue causing the code, drive the vehicle to allow the ECM to run its diagnostic tests
3. Ensure that the Check Engine Light does not reappear after clearing the code

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.