BMW DTC P11AF – Manifold Absolute Pressure/Barometric Pressure Sensor Circuit Low (Bank 2)
DTC P11AF meaning on BMW
The DTC P11AF error code on a BMW indicates an issue with the Manifold Absolute Pressure/Barometric Pressure Sensor Circuit Low in Bank 2. This means that the sensor is detecting a lower than expected voltage signal, which can affect the engine’s performance and fuel efficiency.
BMW DTC P11AF symptoms
Symptoms of the DTC P11AF code on a BMW may include:
- Check Engine Light illuminated
- Reduced engine power
- Poor fuel economy
- Rough idling or stalling
BMW DTC P11AF causes
Common causes of the DTC P11AF code on a BMW include:
- Faulty Manifold Absolute Pressure/Barometric Pressure Sensor
- Wiring or connector issues in the sensor circuit
- Vacuum leaks in the intake system
- Engine mechanical problems
BMW DTC P11AF seriousness
The DTC P11AF code should not be ignored as it can lead to poor engine performance and reduced fuel efficiency. Continuing to drive with this code present may cause further damage to the engine components.
How to diagnose DTC P11AF on BMW
To diagnose the DTC P11AF code on a BMW, you can:
- Use a diagnostic scanner to read the fault codes
- Inspect the Manifold Absolute Pressure/Barometric Pressure Sensor and its wiring for any visible damage
- Check for vacuum leaks in the intake system
- Perform a smoke test to identify any leaks
How to fix DTC P11AF on BMW
To fix the DTC P11AF code on a BMW, you may need to:
- Replace the faulty Manifold Absolute Pressure/Barometric Pressure Sensor
- Repair or replace any damaged wiring or connectors in the sensor circuit
- Address any vacuum leaks in the intake system
- Perform a reset of the engine control module after making repairs
How to erase DTC P11AF on BMW
To erase the DTC P11AF code on a BMW, you can:
- Use a diagnostic scanner to clear the fault codes
- Alternatively, disconnect the car’s battery for a few minutes to reset the engine control module
- Ensure that the underlying issue causing the code has been addressed before clearing it
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.