BMW DTC P11B0 – Manifold Absolute Pressure to Throttle Angle – Too Low (Bank 2)
DTC P11B0 meaning on BMW
DTC P11B0 on a BMW indicates a fault with the Manifold Absolute Pressure (MAP) sensor reading being too low in relation to the throttle angle on Bank 2 of the engine. The Engine Control Module (ECM) uses this data to calculate air intake and fuel injection, so a discrepancy in these values can lead to drivability issues.
BMW DTC P11B0 symptoms
Symptoms of DTC P11B0 on a BMW may include rough idling, poor acceleration, reduced engine power, stalling, and potentially an illuminated Check Engine Light on the dashboard. These symptoms can vary depending on the severity of the issue.
BMW DTC P11B0 causes
The causes of DTC P11B0 on a BMW can include a faulty MAP sensor, a vacuum leak in the intake system, a clogged air filter, issues with the throttle body, or wiring/connectivity problems between the sensor and the ECM. It is essential to diagnose the specific cause to effectively resolve the fault.
BMW DTC P11B0 seriousness
While DTC P11B0 may not always result in immediate drivability issues, it can lead to poor engine performance and potentially affect fuel efficiency. Ignoring this fault can also cause further damage to engine components over time, so it is advisable to address it promptly.
How to diagnose DTC P11B0 on BMW
To diagnose DTC P11B0 on a BMW, a mechanic would typically use a diagnostic scanner to retrieve the fault code and further investigate the MAP sensor readings. They may perform a visual inspection of the intake system for leaks, check the air filter condition, inspect the throttle body, and test the sensor’s electrical connections for proper voltage and continuity.
How to fix DTC P11B0 on BMW
Fixing DTC P11B0 on a BMW involves addressing the root cause of the issue. This may include replacing a faulty MAP sensor, repairing any vacuum leaks, cleaning or replacing the air filter, servicing the throttle body, or repairing any wiring/connectivity problems. Once the underlying problem is resolved, the fault code should be cleared, and the vehicle should be tested to ensure the issue is resolved.
How to erase DTC P11B0 on BMW
To erase DTC P11B0 on a BMW, a diagnostic scanner capable of clearing fault codes is typically used. After the necessary repairs have been made to address the underlying issue, the mechanic can use the scanner to clear the fault code from the ECM’s memory. This should reset the Check Engine Light and allow for a fresh start to monitor the vehicle’s performance.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.