BMW DTC P11B7 – Intake Air Temperature Sensor 2 Signal Stuck (Bank 1)
DTC P11B7 meaning on BMW
DTC P11B7 on a BMW indicates that the Intake Air Temperature Sensor 2 Signal is stuck in a high voltage condition on Bank 1. This means that the Engine Control Module (ECM) is receiving a signal from the intake air temperature sensor that is outside of the expected range, potentially causing issues with fuel delivery and engine performance.
BMW DTC P11B7 symptoms
Symptoms of DTC P11B7 on a BMW may include:
- Check Engine Light illuminated
- Reduced engine performance
- Potential fuel efficiency decrease
- Engine running rough or stalling
BMW DTC P11B7 causes
Common causes of DTC P11B7 on a BMW include:
- Faulty intake air temperature sensor
- Wiring or connector issues in the intake air temperature sensor circuit
- ECM software or hardware problems
BMW DTC P11B7 seriousness
DTC P11B7 should be addressed promptly as it can lead to poor engine performance and potential drivability issues. Ignoring this fault code may result in decreased fuel efficiency and could potentially cause further damage to the engine over time.
How to diagnose DTC P11B7 on BMW
To diagnose DTC P11B7 on a BMW, you can follow these steps:
- Use a diagnostic scanner to retrieve the fault code and freeze frame data
- Inspect the intake air temperature sensor and its wiring for any visible damage or corrosion
- Test the intake air temperature sensor using a multimeter to check for proper resistance values
- Check the ECM for any software updates or faults
How to fix DTC P11B7 on BMW
To fix DTC P11B7 on a BMW, you can try the following:
- Replace the intake air temperature sensor if it is found to be faulty
- Repair any damaged wiring or connectors in the intake air temperature sensor circuit
- Clear the fault code and perform a test drive to ensure the issue is resolved
How to erase DTC P11B7 on BMW
To erase DTC P11B7 on a BMW, you can use a diagnostic scanner to clear the fault code from the ECM’s memory. After clearing the code, it is recommended to perform a test drive to verify that the issue has been resolved and the fault code does not return.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.