P11BD – BMW DTC

BMW DTC P11BD – Throttle Position Sensor A and B Circuit Range/Performance (Bank 2)

DTC P11BD meaning on BMW

The DTC P11BD error code on a BMW indicates an issue with the Throttle Position Sensor A and B Circuit Range/Performance in Bank 2. This means that the Engine Control Module (ECM) has detected that the signal from the throttle position sensor in Bank 2 is outside the expected range or performance parameters.

BMW DTC P11BD symptoms

Symptoms of the BMW DTC P11BD code may include:

• Reduced engine power
• Engine stalling or hesitation
• Poor acceleration
• Check Engine Light (CEL) illuminated on the dashboard

BMW DTC P11BD causes

Common causes of the BMW DTC P11BD code include:

• Faulty throttle position sensor
• Wiring or connector issues in the throttle position sensor circuit
• ECM software or hardware problems

BMW DTC P11BD seriousness

The DTC P11BD error code should not be ignored as it can lead to drivability issues and potential safety concerns. It is recommended to address this issue promptly to prevent further damage to the vehicle.

How to diagnose DTC P11BD on BMW

To diagnose the DTC P11BD code on a BMW, a mechanic may perform the following steps:

1. Use a diagnostic scanner to retrieve the fault codes stored in the ECM
2. Inspect the throttle position sensor and its wiring for any visible damage or corrosion
3. Test the throttle position sensor using a multimeter to check for proper voltage and resistance
4. Check for any related ECM software updates or reprogramming

How to fix DTC P11BD on BMW

To fix the DTC P11BD code on a BMW, the following steps may be taken:

1. Replace the faulty throttle position sensor in Bank 2
2. Repair any damaged wiring or connectors in the throttle position sensor circuit
3. Clear the fault codes stored in the ECM after the repairs have been completed
4. Perform a test drive to ensure the issue has been resolved

How to erase DTC P11BD on BMW

To erase the DTC P11BD code on a BMW, follow these steps:

1. Use a diagnostic scanner to access the ECM and clear the fault codes
2. Ensure that the underlying issue causing the fault code has been addressed
3. Perform a final check to confirm that the code has been successfully erased

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.