P11C2 – BMW DTC

BMW DTC P11C2 – Mass or Volume Air Flow Sensor ‘B’ Circuit Range/Performance – Period Time Too Low

DTC P11C2 meaning on BMW

The DTC P11C2 code on a BMW indicates an issue with the Mass or Volume Air Flow Sensor ‘B’ circuit. Specifically, it signifies that the period time is too low, which means that the sensor is not providing the expected data within the specified time frame.

BMW DTC P11C2 symptoms

Symptoms of the DTC P11C2 code on a BMW may include:

• Check Engine Light illuminated
• Reduced engine performance
• Engine stalling or hesitation
• Poor fuel efficiency

BMW DTC P11C2 causes

Common causes of the DTC P11C2 code on a BMW include:

• Dirty or faulty Mass Air Flow (MAF) sensor
• Wiring or connector issues in the MAF sensor circuit
• Air intake system leaks
• Engine vacuum leaks

BMW DTC P11C2 seriousness

While the DTC P11C2 code may not cause immediate harm to the vehicle, it can lead to poor engine performance and reduced fuel efficiency if left unresolved. Ignoring this issue may result in further damage to engine components over time.

How to diagnose DTC P11C2 on BMW

To diagnose the DTC P11C2 code on a BMW, you can perform the following steps:

1. Use an OBD-II scanner to retrieve the fault codes and freeze frame data.
2. Inspect the MAF sensor and its wiring for any visible damage or contamination.
3. Check for air leaks in the intake system and vacuum lines.
4. Perform a smoke test to identify any leaks in the system.

How to fix DTC P11C2 on BMW

To fix the DTC P11C2 code on a BMW, you can try the following solutions:

1. Clean or replace the Mass Air Flow (MAF) sensor if it is dirty or faulty.
2. Repair any damaged wiring or connectors in the MAF sensor circuit.
3. Address any air intake system leaks by replacing gaskets or hoses.
4. Fix any engine vacuum leaks that may be affecting sensor readings.

How to erase DTC P11C2 on BMW

To erase the DTC P11C2 code on a BMW, you can use an OBD-II scanner to clear the fault codes stored in the vehicle’s computer. After addressing the underlying issue causing the code, clearing the code will reset the Check Engine Light and monitor the system for any recurring problems.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.