P11C3 – BMW DTC

BMW DTC P11C3 – Mass or Volume Air Flow Sensor ‘B’ Circuit Range/Performance – Period Time Too High

DTC P11C3 meaning on BMW

DTC P11C3 on a BMW indicates an issue with the Mass or Volume Air Flow Sensor ‘B’ circuit. Specifically, it signifies that the period time is too high, indicating a potential range/performance problem with the sensor.

BMW DTC P11C3 symptoms

Symptoms of DTC P11C3 on a BMW may include:

• Check Engine Light illuminated
• Reduced engine performance
• Poor fuel efficiency
• Engine stalling or hesitation

BMW DTC P11C3 causes

Common causes of DTC P11C3 on a BMW include:

• Dirty or faulty Mass Air Flow (MAF) sensor
• Wiring or connector issues in the MAF sensor circuit
• Air intake leaks or restrictions
• Engine vacuum leaks

BMW DTC P11C3 seriousness

Ignoring DTC P11C3 on a BMW can lead to potential engine performance issues and decreased fuel efficiency. It is recommended to address this fault promptly to prevent further damage to the vehicle.

How to diagnose DTC P11C3 on BMW

To diagnose DTC P11C3 on a BMW, you can perform the following steps:

1. Use a diagnostic scanner to retrieve the fault code and freeze frame data
2. Inspect the MAF sensor and its wiring for any visible damage or contamination
3. Check for air leaks in the intake system
4. Perform a visual inspection of the vacuum lines and connections

How to fix DTC P11C3 on BMW

To fix DTC P11C3 on a BMW, you can try the following solutions:

1. Clean or replace the Mass Air Flow sensor
2. Repair any damaged wiring or connectors in the MAF sensor circuit
3. Address any air intake leaks or restrictions
4. Fix any vacuum leaks in the engine system

How to erase DTC P11C3 on BMW

To erase DTC P11C3 on a BMW, you can use a diagnostic scanner to clear the fault code from the vehicle’s memory. After addressing the underlying issue causing the fault code, you can reset the code to turn off the Check Engine Light.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.