BMW DTC P11EE – Throttle/Pedal Position Sensor/Switch ‘E’ Circuit Voltage Low
DTC P11EE meaning on BMW
The DTC P11EE error code on a BMW indicates an issue with the Throttle/Pedal Position Sensor/Switch ‘E’ Circuit Voltage being too low. This means that the signal voltage from the sensor or switch is below the expected range, causing the vehicle’s engine control module (ECM) to detect a fault.
BMW DTC P11EE symptoms
Symptoms of the DTC P11EE error code on a BMW may include:
- Reduced engine power
- Engine stalling or hesitation
- Difficulty accelerating
- Illuminated Check Engine Light
BMW DTC P11EE causes
Common causes of the DTC P11EE error code on a BMW include:
- Faulty Throttle/Pedal Position Sensor/Switch ‘E’
- Wiring or connector issues in the sensor circuit
- ECM software or hardware problems
BMW DTC P11EE seriousness
The DTC P11EE error code should be addressed promptly as it can lead to drivability issues and potential safety concerns. Ignoring this fault may result in further damage to the vehicle’s engine or drivetrain components.
How to diagnose DTC P11EE on BMW
To diagnose the DTC P11EE error code on a BMW, you can perform the following steps:
- Use a diagnostic scanner to retrieve the fault codes stored in the ECM.
- Inspect the Throttle/Pedal Position Sensor/Switch ‘E’ for any visible damage or wear.
- Check the wiring and connectors in the sensor circuit for loose connections or corrosion.
- Test the sensor’s voltage output using a multimeter to ensure it is within the specified range.
How to fix DTC P11EE on BMW
To fix the DTC P11EE error code on a BMW, you can try the following solutions:
- Replace the faulty Throttle/Pedal Position Sensor/Switch ‘E’ with a new one.
- Repair any damaged wiring or connectors in the sensor circuit.
- Update the ECM software to the latest version to address any software-related issues.
How to erase DTC P11EE on BMW
To erase the DTC P11EE error code on a BMW, you can use a diagnostic scanner to clear the fault codes stored in the ECM. Once the codes are cleared, you can drive the vehicle and monitor if the issue reoccurs. If the problem persists, further diagnosis and repairs may be necessary.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.