BMW DTC P1205 – O2 Sensor Circuit Full Load Test Signal Too Low (Bank 2 Sensor 2)
DTC P1205 meaning on BMW
The Diagnostic Trouble Code (DTC) P1205 for BMW indicates that the O2 Sensor Circuit Full Load Test Signal is Too Low on Bank 2 Sensor 2. This means that the signal from the oxygen sensor located downstream of the catalytic converter on the second bank of cylinders is not within the expected range during full load conditions.
BMW DTC P1205 symptoms
Symptoms of DTC P1205 on a BMW may include:
- Check Engine Light (MIL) illuminated
- Decreased fuel efficiency
- Engine running rough or misfiring
- Reduced engine performance
BMW DTC P1205 causes
Common causes of DTC P1205 on a BMW include:
- Faulty oxygen sensor (Bank 2 Sensor 2)
- Wiring or connector issues in the O2 sensor circuit
- Exhaust leaks near the sensor
- Engine running too rich or too lean
BMW DTC P1205 seriousness
While DTC P1205 may not cause immediate drivability issues, it can lead to decreased fuel efficiency and potentially harm the catalytic converter over time if left unresolved. It is recommended to address this issue promptly to prevent further damage to the vehicle.
How to diagnose DTC P1205 on BMW
To diagnose DTC P1205 on a BMW, you can follow these steps:
- Use a diagnostic scanner to retrieve the fault codes and identify the specific sensor triggering the code.
- Inspect the wiring and connectors of Bank 2 Sensor 2 for any damage or corrosion.
- Check for exhaust leaks near the sensor that could be affecting its readings.
- Perform a full load test to monitor the O2 sensor signal and compare it to specifications.
How to fix DTC P1205 on BMW
To fix DTC P1205 on a BMW, you can try the following solutions:
- Replace the faulty oxygen sensor (Bank 2 Sensor 2) with a new, OEM-quality sensor.
- Repair any damaged wiring or connectors in the O2 sensor circuit.
- Address any exhaust leaks near the sensor by fixing or replacing the affected components.
- If the engine is running too rich or too lean, diagnose and correct the underlying issue.
How to erase DTC P1205 on BMW
To erase DTC P1205 on a BMW, you can use a diagnostic scanner to clear the fault codes stored in the vehicle’s computer. After addressing the root cause of the issue and making the necessary repairs, you can reset the codes to see if the problem has been resolved. It is important to ensure that the repairs have been successful before clearing the codes to prevent the issue from recurring.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.