P1229 – BMW DTC

BMW DTC P1229 – Throttle Sensor Adaptation Failure

DTC P1229 meaning on BMW

The Diagnostic Trouble Code (DTC) P1229 on a BMW indicates a Throttle Sensor Adaptation Failure. This means that the engine control module (ECM) has detected an issue with the adaptation of the throttle sensor, which is responsible for monitoring the position of the throttle pedal and communicating this information to the ECM for proper engine operation.

BMW DTC P1229 symptoms

Symptoms of a DTC P1229 on a BMW may include:

• Reduced engine power
• Engine hesitation or stalling
• Check Engine Light (CEL) illuminated on the dashboard
• Difficulty accelerating

BMW DTC P1229 causes

The causes of a DTC P1229 on a BMW can vary, but common reasons include:

• Throttle sensor malfunction
• Wiring or connector issues in the throttle sensor circuit
• ECM software or hardware problems

BMW DTC P1229 seriousness

The seriousness of a DTC P1229 on a BMW should not be ignored, as it can lead to drivability issues and potential safety concerns. It is recommended to address this issue promptly to prevent further damage to the vehicle and ensure proper operation.

How to diagnose DTC P1229 on BMW

To diagnose a DTC P1229 on a BMW, a mechanic would typically perform the following steps:

1. Use a diagnostic scanner to retrieve the fault codes stored in the ECM
2. Inspect the throttle sensor and its wiring for any visible damage or corrosion
3. Test the throttle sensor’s output voltage and resistance
4. Check for any software updates for the ECM

How to fix DTC P1229 on BMW

To fix a DTC P1229 on a BMW, the following steps may be taken:

1. Replace the throttle sensor if it is found to be faulty
2. Repair any damaged wiring or connectors in the throttle sensor circuit
3. Update the ECM software if necessary
4. Perform a throttle sensor adaptation reset using a diagnostic scanner

How to erase DTC P1229 on BMW

To erase a DTC P1229 on a BMW, a mechanic can use a diagnostic scanner to clear the fault code from the ECM’s memory. After addressing the underlying issue causing the fault code, the mechanic can then reset the ECM and verify that the code has been successfully erased.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.