BMW DTC P1325 – B Camshaft Starting Position not Reached (Bank 1)
DTC P1325 meaning on BMW
DTC P1325 on a BMW indicates that the camshaft starting position has not been reached for Bank 1. This means that the engine control module (ECM) is unable to detect the correct position of the camshaft in relation to the crankshaft during the starting process.
BMW DTC P1325 symptoms
Symptoms of DTC P1325 on a BMW may include:
- Engine misfires
- Rough idling
- Reduced engine performance
- Check Engine Light (CEL) illuminated on the dashboard
BMW DTC P1325 causes
Common causes of DTC P1325 on a BMW include:
- Camshaft position sensor malfunction
- Timing chain or belt issues
- Camshaft phaser problems
- Wiring or connector issues in the camshaft position sensor circuit
BMW DTC P1325 seriousness
DTC P1325 should not be ignored as it can lead to engine performance issues and potential damage if left unresolved. It is recommended to address this issue promptly to prevent further complications.
How to diagnose DTC P1325 on BMW
To diagnose DTC P1325 on a BMW, you can perform the following steps:
- Use a diagnostic scanner to retrieve the fault codes stored in the ECM.
- Inspect the camshaft position sensor and its wiring for any visible damage or corrosion.
- Check the timing chain or belt for proper alignment and tension.
- Perform a visual inspection of the camshaft phaser for any signs of wear or malfunction.
How to fix DTC P1325 on BMW
To fix DTC P1325 on a BMW, you can try the following solutions:
- Replace the camshaft position sensor if it is found to be faulty.
- Inspect and repair any wiring or connector issues in the camshaft position sensor circuit.
- Address any timing chain or belt problems by adjusting or replacing them as needed.
- If the camshaft phaser is faulty, consider replacing it with a new one.
How to erase DTC P1325 on BMW
To erase DTC P1325 on a BMW, you can use a diagnostic scanner to clear the fault codes stored in the ECM. After addressing the underlying issue causing the fault code, you can reset the system to remove the DTC P1325 from the vehicle’s memory.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.