BMW DTC P1360 – Misfire during Start Cylinder 10
DTC P1360 meaning on BMW
DTC P1360 on a BMW indicates a misfire during start in cylinder 10. This fault code is specific to BMW vehicles and is triggered when the engine control module detects a misfire event occurring during the engine start-up process in cylinder 10.
BMW DTC P1360 symptoms
Symptoms of DTC P1360 in a BMW may include rough idling, engine hesitation, loss of power, and in some cases, the vehicle may even fail to start. The Check Engine Light (CEL) will likely be illuminated on the dashboard as well.
BMW DTC P1360 causes
The common causes of DTC P1360 in a BMW include faulty ignition coils, spark plugs, fuel injectors, or wiring issues related to cylinder 10. Additionally, a vacuum leak, low fuel pressure, or a problem with the engine control module could also lead to this fault code.
BMW DTC P1360 seriousness
Ignoring DTC P1360 in a BMW can lead to further engine damage, reduced fuel efficiency, and potential drivability issues. It is important to address this fault code promptly to prevent any long-term damage to the vehicle.
How to diagnose DTC P1360 on BMW
To diagnose DTC P1360 on a BMW, start by using a diagnostic scanner to retrieve the fault code and further information about the misfire in cylinder 10. Perform a visual inspection of the ignition system components, including the ignition coils, spark plugs, and wiring. Conduct a compression test to check the health of the cylinder. Additionally, inspect the fuel injectors and fuel system for any issues.
How to fix DTC P1360 on BMW
To fix DTC P1360 on a BMW, start by addressing the root cause of the misfire in cylinder 10. Replace any faulty ignition coils, spark plugs, or fuel injectors as needed. Ensure all wiring connections related to cylinder 10 are secure and free of damage. If a vacuum leak is suspected, repair or replace the affected components. Finally, clear the fault code and test drive the vehicle to ensure the issue has been resolved.
How to erase DTC P1360 on BMW
To erase DTC P1360 on a BMW, you can use a diagnostic scanner to clear the fault code from the engine control module’s memory. Once the repair has been completed and the root cause of the misfire has been addressed, you can reset the Check Engine Light and verify that the fault code does not return during subsequent driving cycles.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.