P13B2 – BMW DTC

BMW DTC P13B2 – Camshaft Position Sensor Signal ‘B’ Synchronization Error (Bank 1)

DTC P13B2 meaning on BMW

The DTC P13B2 error code on BMW vehicles indicates a Camshaft Position Sensor Signal ‘B’ Synchronization Error in Bank 1. This means that there is an issue with the synchronization of the camshaft position sensor signal in the specified bank.

BMW DTC P13B2 symptoms

Symptoms of the BMW DTC P13B2 code may include:

• Check Engine Light illuminated on the dashboard
• Engine running rough or misfiring
• Reduced engine performance
• Difficulty starting the engine

BMW DTC P13B2 causes

Common causes of the BMW DTC P13B2 code include:

• Faulty camshaft position sensor
• Wiring or connector issues related to the camshaft position sensor
• Timing chain or belt problems
• Engine mechanical issues

BMW DTC P13B2 seriousness

The DTC P13B2 error code should not be ignored as it can lead to engine performance issues and potential drivability problems. It is recommended to address this issue promptly to prevent further damage to the vehicle.

How to diagnose DTC P13B2 on BMW

To diagnose the DTC P13B2 code on a BMW, you can perform the following steps:

1. Use a diagnostic scanner to retrieve the fault codes and data related to the camshaft position sensor.
2. Inspect the camshaft position sensor and its wiring for any visible damage or corrosion.
3. Check the timing chain or belt for proper alignment and tension.
4. Perform a visual inspection of the engine components related to the camshaft position sensor.

How to fix DTC P13B2 on BMW

To fix the DTC P13B2 code on a BMW, you can try the following solutions:

1. Replace the faulty camshaft position sensor with a new one.
2. Repair or replace any damaged wiring or connectors related to the camshaft position sensor.
3. Address any timing chain or belt issues that may be causing the synchronization error.
4. Perform a thorough inspection and repair of any engine mechanical problems.

How to erase DTC P13B2 on BMW

To erase the DTC P13B2 code on a BMW, you can use a diagnostic scanner to clear the fault codes stored in the vehicle’s ECU. Once the codes are cleared, you can drive the vehicle and monitor if the issue reoccurs. If the problem persists, further diagnosis and repairs may be necessary.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.