BMW DTC P13DC – ‘B’ Camshaft Incorrect Assembly (Bank 2)
DTC P13DC meaning on BMW
The DTC P13DC on a BMW indicates that there is an issue with the ‘B’ camshaft being incorrectly assembled in Bank 2 of the engine. This fault code is specific to BMW vehicles and is related to the camshaft position sensor detecting that the camshaft is not in the correct position or alignment.
BMW DTC P13DC symptoms
Symptoms of the DTC P13DC on a BMW may include rough idling, engine misfires, loss of power, poor acceleration, and in some cases, the Check Engine Light may illuminate on the dashboard.
BMW DTC P13DC causes
The main causes of the DTC P13DC on a BMW are typically related to incorrect installation or assembly of the ‘B’ camshaft in Bank 2. This could be due to a timing chain issue, a faulty camshaft position sensor, or mechanical problems with the camshaft itself.
BMW DTC P13DC seriousness
The DTC P13DC is a serious fault code that should not be ignored. Driving with this fault can potentially cause further damage to the engine and other components. It is recommended to address this issue promptly to prevent any long-term damage.
How to diagnose DTC P13DC on BMW
To diagnose the DTC P13DC on a BMW, a mechanic would typically use a diagnostic scanner to retrieve the fault code and then perform a visual inspection of the camshaft assembly in Bank 2. They may also check the timing chain, camshaft position sensor, and related components for any signs of wear or damage.
How to fix DTC P13DC on BMW
Fixing the DTC P13DC on a BMW usually involves correcting the assembly of the ‘B’ camshaft in Bank 2. This may require re-timing the camshaft, replacing the camshaft position sensor, or addressing any mechanical issues with the camshaft itself. It is recommended to have this repair done by a qualified mechanic to ensure proper installation and alignment.
How to erase DTC P13DC on BMW
Once the issue causing the DTC P13DC on a BMW has been fixed, the fault code can be erased using a diagnostic scanner. The scanner can clear the code from the vehicle’s computer system, and the Check Engine Light should turn off once the fault code has been successfully cleared.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.