BMW DTC P1418 – Secondary Air Injection Valve/Secondary Air Hose Clamped
DTC P1418 meaning on BMW
The Diagnostic Trouble Code (DTC) P1418 for BMW indicates an issue with the Secondary Air Injection (AIR) system. This system is responsible for reducing harmful emissions by injecting fresh air into the exhaust system to help with the combustion of unburned fuel. The code specifically points to a problem with the Secondary Air Injection Valve or the Secondary Air Hose being clamped.
BMW DTC P1418 symptoms
Symptoms of DTC P1418 on a BMW may include:
- Check Engine Light (MIL) illuminated on the dashboard
- Decreased engine performance
- Increased emissions
- Engine running rough or stalling
BMW DTC P1418 causes
The common causes of DTC P1418 on a BMW are:
- Defective Secondary Air Injection Valve
- Clamped Secondary Air Hose
- Wiring or connector issues in the AIR system
- Vacuum leaks in the system
BMW DTC P1418 seriousness
While DTC P1418 may not cause immediate drivability issues, it is important to address this code promptly to prevent further damage to the emissions system and ensure compliance with environmental regulations. Ignoring this code can lead to increased emissions and potential engine performance problems.
How to diagnose DTC P1418 on BMW
To diagnose DTC P1418 on a BMW, you can follow these steps:
- Use a diagnostic scanner to retrieve the fault code and freeze frame data
- Inspect the Secondary Air Injection Valve and Secondary Air Hose for any visible damage or leaks
- Check the wiring and connectors in the AIR system for any signs of wear or corrosion
- Perform a smoke test to identify any vacuum leaks in the system
How to fix DTC P1418 on BMW
To fix DTC P1418 on a BMW, you can consider the following steps:
- Replace the faulty Secondary Air Injection Valve if it is defective
- Ensure the Secondary Air Hose is properly clamped and free of leaks
- Repair any damaged wiring or connectors in the AIR system
- Address any vacuum leaks by replacing the affected components
How to erase DTC P1418 on BMW
To erase DTC P1418 on a BMW, you can clear the code using a diagnostic scanner. After fixing the underlying issue causing the fault code, you can use the scanner to reset the Check Engine Light and clear the code from the vehicle’s memory. This will ensure that the system recognizes the repair and monitors the emissions system properly.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.