BMW DTC P1439 – EVAP System Vent Valve Stuck Open (Bank 2)
DTC P1439 meaning on BMW
DTC P1439 on a BMW indicates a fault with the EVAP (Evaporative Emission Control) system vent valve for Bank 2. This fault code specifically points to the vent valve being stuck open, which can lead to issues with the vehicle’s emissions control system.
BMW DTC P1439 symptoms
Symptoms of DTC P1439 on a BMW may include:
- Check Engine Light illuminated
- Decreased fuel efficiency
- Strong fuel odor near the vehicle
- Rough idling or stalling
BMW DTC P1439 causes
The common causes of DTC P1439 on a BMW include:
- Faulty EVAP system vent valve
- Wiring or connector issues related to the vent valve
- Debris or blockage in the vent valve
BMW DTC P1439 seriousness
While DTC P1439 may not cause immediate drivability issues, it is important to address this fault as it can lead to increased emissions and potential long-term damage to the vehicle’s emissions control system. Ignoring this fault can also result in a failed emissions test.
How to diagnose DTC P1439 on BMW
To diagnose DTC P1439 on a BMW, a mechanic would typically perform the following steps:
- Use a diagnostic scanner to retrieve the fault code
- Inspect the EVAP system vent valve for Bank 2
- Check the wiring and connectors for any damage or corrosion
- Test the vent valve for proper operation
How to fix DTC P1439 on BMW
To fix DTC P1439 on a BMW, the following steps are commonly taken:
- Replace the faulty EVAP system vent valve for Bank 2
- Repair or replace any damaged wiring or connectors
- Clean out any debris or blockage in the vent valve
- Clear the fault code and reset the Check Engine Light
How to erase DTC P1439 on BMW
To erase DTC P1439 on a BMW, you can use a diagnostic scanner to clear the fault code from the vehicle’s computer. After fixing the underlying issue causing the fault code, clearing it will reset the Check Engine Light and ensure the repair was successful.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.