P14B0 – BMW DTC

BMW DTC P14B0 – Exhaust Gas Back Pressure Sensor Circuit Low (Bank 2, front of Particle Filter)

DTC P14B0 meaning on BMW

The DTC P14B0 on a BMW indicates a fault with the Exhaust Gas Back Pressure Sensor Circuit Low in Bank 2, located at the front of the Particle Filter. This fault code is specific to the exhaust system and can affect the vehicle’s emissions control and performance.

BMW DTC P14B0 symptoms

Symptoms of the DTC P14B0 on a BMW may include:

• Check Engine Light illuminated
• Reduced engine power
• Increased fuel consumption
• Black smoke from the exhaust

BMW DTC P14B0 causes

Common causes of the DTC P14B0 on a BMW include:

• Faulty Exhaust Gas Back Pressure Sensor
• Wiring or connector issues in the sensor circuit
• Exhaust system leaks
• Software or calibration issues

BMW DTC P14B0 seriousness

The DTC P14B0 should be addressed promptly as it can lead to poor engine performance, increased emissions, and potential damage to other components in the exhaust system. Ignoring this fault code may result in further issues and could impact the vehicle’s drivability.

How to diagnose DTC P14B0 on BMW

To diagnose the DTC P14B0 on a BMW, you can follow these steps:

1. Use a diagnostic scanner to retrieve the fault code and related data
2. Inspect the Exhaust Gas Back Pressure Sensor and its wiring for any visible damage
3. Check for exhaust leaks or other issues in the exhaust system
4. Perform a sensor test using a multimeter to check for proper voltage and resistance

How to fix DTC P14B0 on BMW

To fix the DTC P14B0 on a BMW, you can try the following solutions:

1. Replace the Exhaust Gas Back Pressure Sensor if it is faulty
2. Repair any damaged wiring or connectors in the sensor circuit
3. Address any exhaust leaks or system issues
4. Update the vehicle’s software or calibration if necessary

How to erase DTC P14B0 on BMW

To erase the DTC P14B0 on a BMW, you can use a diagnostic scanner to clear the fault code from the vehicle’s memory. After addressing the underlying issue and making the necessary repairs, you can reset the Check Engine Light and ensure that the fault code does not reappear.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.