BMW DTC P14F2 – Wheel Speed Sensor Front/Right Circuit Low
DTC P14F2 meaning on BMW
The DTC P14F2 error code on a BMW indicates an issue with the Wheel Speed Sensor Front/Right Circuit registering a low voltage signal. This fault typically points to a problem with the front right wheel speed sensor or its circuitry.
BMW DTC P14F2 symptoms
Symptoms of the BMW DTC P14F2 code may include:
- ABS warning light illuminated on the dashboard
- Traction control system malfunction
- Stability control system failure
- Loss of ABS functionality
- Unusual braking behavior
BMW DTC P14F2 causes
Common causes of the BMW DTC P14F2 fault code include:
- Defective front right wheel speed sensor
- Damaged wiring or connectors in the wheel speed sensor circuit
- Corrosion or debris affecting sensor operation
- Faulty ABS control module
BMW DTC P14F2 seriousness
The BMW DTC P14F2 error code should be addressed promptly as it can affect the proper functioning of the vehicle’s ABS, traction control, and stability control systems. Ignoring this issue may compromise the safety and performance of the vehicle, especially during braking and cornering maneuvers.
How to diagnose DTC P14F2 on BMW
To diagnose the DTC P14F2 code on a BMW, you can perform the following steps:
- Use a diagnostic scanner to retrieve the fault codes stored in the vehicle’s computer.
- Inspect the front right wheel speed sensor and its wiring for any visible damage or corrosion.
- Test the wheel speed sensor using a multimeter to check for proper resistance and voltage output.
- Check the ABS control module for any faults or malfunctions.
How to fix DTC P14F2 on BMW
To fix the DTC P14F2 code on a BMW, you can try the following solutions:
- Replace the front right wheel speed sensor if it is found to be faulty.
- Repair or replace any damaged wiring or connectors in the wheel speed sensor circuit.
- Clean any corrosion or debris affecting sensor operation.
- If the issue persists, consider replacing the ABS control module.
How to erase DTC P14F2 on BMW
To erase the DTC P14F2 code on a BMW, you can use a diagnostic scanner to clear the fault codes stored in the vehicle’s computer. After addressing the underlying issue causing the fault code, clearing the code will reset the system and turn off the warning lights on the dashboard.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.