BMW DTC P14F4 – Wheel Speed Sensor Rear/Left Circuit Low
DTC P14F4 meaning on BMW
The DTC P14F4 error code on a BMW indicates an issue with the Wheel Speed Sensor Rear/Left Circuit registering a low signal. This means that the sensor responsible for monitoring the speed of the rear left wheel is reporting a signal that is below the expected range.
BMW DTC P14F4 symptoms
Symptoms of the DTC P14F4 error code on a BMW may include:
- ABS warning light illuminated on the dashboard
- Traction control system malfunction
- Stability control system not functioning properly
- Increased stopping distance during braking
BMW DTC P14F4 causes
Common causes of the DTC P14F4 error code on a BMW include:
- Faulty wheel speed sensor
- Corroded or damaged sensor wiring
- Poor electrical connection at the sensor
- Defective ABS control module
BMW DTC P14F4 seriousness
The DTC P14F4 error code should be addressed promptly as it can affect the proper functioning of the vehicle’s safety systems, such as ABS, traction control, and stability control. Ignoring this issue may compromise the vehicle’s ability to maintain stability and control during braking and cornering maneuvers.
How to diagnose DTC P14F4 on BMW
To diagnose the DTC P14F4 error code on a BMW, you can follow these steps:
- Use a diagnostic scanner to retrieve the fault codes stored in the vehicle’s computer.
- Inspect the rear left wheel speed sensor and its wiring for any visible damage or corrosion.
- Check the electrical connection at the sensor for tightness and cleanliness.
- Perform a visual inspection of the ABS control module for any signs of damage.
How to fix DTC P14F4 on BMW
To fix the DTC P14F4 error code on a BMW, you can try the following solutions:
- Replace the rear left wheel speed sensor if it is found to be faulty.
- Repair or replace any damaged or corroded wiring connected to the sensor.
- Clean and secure the electrical connection at the sensor.
- If the ABS control module is defective, it may need to be replaced or reprogrammed.
How to erase DTC P14F4 on BMW
To erase the DTC P14F4 error code on a BMW, you can use a diagnostic scanner to clear the fault codes stored in the vehicle’s computer. After addressing the underlying issue causing the error code, clearing the codes will reset the system and turn off the warning lights on the dashboard.
Recommended tools & DTC Scanners for BMW
Best Diagnostic App for modern BMWs: BimmerLink
Recommended Bluetooth adapter for Bimmerlink: OBDLink CX
Cable adapter for Bimmerlink: Enet Cable USB Type C
For older BMWs we recommend: Autel AutoLink AL319 (2024 version)
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.